Please enter a minimum 3 letters or numbers
Technical Content
Part Image

MAX3311EUB+T - Analog Devices

Description: RS-232 Interface IC 460kbps, 1 uA Supply Current, RS-232-Compatible Transceivers in uMAX

Download MAX3311EUB+T Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
MAX3311EUB+T - Analog Devices - PCB symbol
click to zoom
PCB Footprints
MAX3311EUB+T - Analog Devices PCB footprint - Small Outline Packages - Small Outline Packages - 10 µMAX
click to zoom
3D Models
MAX3311EUB+T - Analog Devices - 3D model - Small Outline Packages - 10 µMAX
click to zoom

MAX3311EUB+T Details

  • Manufacturer Part Number:

    MAX3311EUB+T

  • Brand Name:

    Analog Devices Inc

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    10-MINI_SO-N/A

  • Package Description:

    TSSOP,

  • Pin Count:

    10

  • Manufacturer Package Code:

    10-MINI_SO-N/A

  • Reach Compliance Code:

    Compliant

  • Country Of Origin:

    Japan, Mainland China, Malaysia, Philippines, Singapore, South Korea, Taiwan, Thailand, USA

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.60

  • Date Of Intro:

    2001-02-19

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    9

  • Differential Output:

    NO

  • Driver Number of Bits:

    1

  • Input Characteristics:

    SCHMITT TRIGGER

  • Interface IC Type:

    LINE TRANSCEIVER

  • Interface Standard:

    EIA-232; TIA-232

  • JESD-30 Code:

    S-PDSO-G10

  • JESD-609 Code:

    e3

  • Length:

    3 mm

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    1

  • Number of Terminals:

    10

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    TSSOP

  • Package Shape:

    SQUARE

  • Package Style:

    SMALL OUTLINE, THIN PROFILE, SHRINK PITCH

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Receiver Number of Bits:

    1

  • Seated Height-Max:

    1.1 mm

  • Supply Voltage-Max:

    5.5 V

  • Supply Voltage-Min:

    4.5 V

  • Supply Voltage-Nom:

    5 V

  • Surface Mount:

    YES

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    0.5 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Width:

    3 mm

MAX3311EUB+T Frequently Asked Questions (FAQs)

  • A good PCB layout for the MAX3311EUB+T involves keeping the input and output traces short and away from each other, using a solid ground plane, and placing bypass capacitors close to the device. A 4-layer PCB with a dedicated ground plane is recommended. Additionally, the device should be placed near the connector to minimize the length of the input traces.
  • To ensure proper termination for RS-485 applications, a 120Ω termination resistor should be placed at the far end of the bus, and a 220Ω to 330Ω pull-up resistor should be connected from the A and B lines to VCC. The MAX3311EUB+T also has an internal 15kΩ pull-up resistor on the DE pin, which can be used to enable the transmitter.
  • The maximum cable length supported by the MAX3311EUB+T depends on the data rate and the type of cable used. As a general rule, the maximum cable length is inversely proportional to the data rate. For example, at a data rate of 10Mbps, the maximum cable length is approximately 50 feet (15 meters), while at a data rate of 100kbps, the maximum cable length is approximately 4000 feet (1200 meters).
  • To protect the MAX3311EUB+T from ESD and surge events, it is recommended to use TVS (Transient Voltage Suppressor) diodes on the input lines, and to follow proper PCB layout and grounding practices. Additionally, the device has built-in ESD protection of ±15kV on the input lines, but this may not be sufficient for all applications.
  • The power-up sequence for the MAX3311EUB+T is as follows: VCC should be powered up first, followed by the input signals. The DE pin should be pulled high after VCC has reached its nominal value. This ensures that the device is properly initialized and prevents any unwanted transmission during power-up.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

MAX3311EUB+T Overview

Use the download button to access the MAX3311EUB+T schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MAX33, or try a keyword search, such as Line Driver or Receivers

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to MAX3311EUB+T

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑

MAX3311EUB+T Alternates

Showing results

Image Part Number Model
Part Image MAX3311EUB Rochester Electronics LLC

LINE TRANSCEIVER, PDSO10, UMAX-10
Part Image MAX3311EUB+T Maxim Integrated Products

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, PDSO10
Part Image MAX3311EUB Maxim Integrated Products

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, PDSO10
Part Image MAX3311CUB-T Maxim Integrated Products

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, PDSO10
Part Image MAX3311CUB Maxim Integrated Products

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, PDSO10
For a full list of alternate parts for MAX3311EUB+T, check out Findchips.com