Please enter a minimum 3 letters or numbers
Technical Content
Part Image

MAX3471CUA+T - Analog Devices

Description: ♦ 1.6µA Supply Current with Receiver Enabled ♦ +2.5V to +5.5V Single-Supply Operation ♦ True Fail-Safe Receiver Input ♦ Available in µMAX Package ♦ 1/8-Unit-Load Receiver Input ♦ -7V to +10V Common-Mode Input Voltage Range

Download MAX3471CUA+T Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
MAX3471CUA+T - Analog Devices - PCB symbol
click to zoom
PCB Footprints
MAX3471CUA+T - Analog Devices PCB footprint - Small Outline Packages - Small Outline Packages - 8 µMAX
click to zoom
3D Models
MAX3471CUA+T - Analog Devices - 3D model - Small Outline Packages - 8 µMAX
click to zoom

MAX3471CUA+T Details

  • Manufacturer Part Number:

    MAX3471CUA+T

  • Brand Name:

    Analog Devices Inc

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    8-MINI_SO-N/A

  • Package Description:

    TSSOP, TSSOP8,.19

  • Pin Count:

    8

  • Manufacturer Package Code:

    8-MINI_SO-N/A

  • Reach Compliance Code:

    Compliant

  • Country Of Origin:

    Japan, Mainland China, Malaysia, Philippines, Singapore, South Korea, Taiwan, Thailand, USA

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.60

  • Date Of Intro:

    1998-02-01

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    9

  • Differential Output:

    YES

  • Driver Number of Bits:

    1

  • High Level Input Current-Max:

    0.000001 A

  • Input Characteristics:

    DIFFERENTIAL SCHMITT TRIGGER

  • Interface IC Type:

    LINE TRANSCEIVER

  • Interface Standard:

    EIA-422; EIA-485

  • JESD-30 Code:

    S-PDSO-G8

  • JESD-609 Code:

    e3

  • Length:

    3 mm

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    1

  • Number of Terminals:

    8

  • Operating Temperature-Max:

    70 °C

  • Out Swing-Min:

    0.2 V

  • Output Low Current-Max:

    0.0022 A

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    TSSOP

  • Package Equivalence Code:

    TSSOP8,.19

  • Package Shape:

    SQUARE

  • Package Style:

    SMALL OUTLINE, THIN PROFILE, SHRINK PITCH

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Receive Delay-Max:

    12000 ns

  • Receiver Number of Bits:

    1

  • Seated Height-Max:

    1.1 mm

  • Supply Current-Max:

    0.1 mA

  • Supply Voltage-Max:

    5.5 V

  • Supply Voltage-Min:

    2.5 V

  • Supply Voltage-Nom:

    3.6 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Temperature Grade:

    COMMERCIAL

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    0.65 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Transmit Delay-Max:

    2000 ns

  • Width:

    3 mm

MAX3471CUA+T Frequently Asked Questions (FAQs)

  • A good PCB layout for the MAX3471CUA+T involves keeping the analog and digital grounds separate, using a solid ground plane, and placing the device close to the battery. Additionally, it's recommended to use a 4-layer PCB with a dedicated power plane and to minimize the length of the traces between the device and the battery.
  • To ensure accurate fuel gauge measurements, it's essential to calibrate the device during manufacturing, use a high-accuracy voltage reference, and compensate for temperature effects. Additionally, the device should be connected to a high-impedance battery, and the measurement frequency should be set to 1 kHz or higher.
  • The MAX3471CUA+T can operate over a temperature range of -40°C to +85°C, but the accuracy of the fuel gauge measurements may degrade at extreme temperatures. It's recommended to operate the device within a temperature range of 0°C to 60°C for optimal performance.
  • Yes, the MAX3471CUA+T can be used in applications with multiple battery cells, but it requires additional external circuitry to sum the currents and voltages of each cell. The device can also be used in parallel with other fuel gauge ICs to monitor multiple battery packs.
  • The MAX3471CUA+T can be interfaced with a microcontroller using a 2-wire I²C interface. The device has a 7-bit address, and the microcontroller can read the fuel gauge data by sending a read command to the device. The device also has an interrupt output that can be used to wake up the microcontroller when the fuel gauge level falls below a certain threshold.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

MAX3471CUA+T Overview

Use the download button to access the MAX3471CUA+T schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MAX34, or try a keyword search, such as Line Driver or Receivers

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to MAX3471CUA+T

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑

MAX3471CUA+T Alternates

Showing results

Image Part Number Model
Part Image MAX3471EUA+ Maxim Integrated Products

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, CMOS, PDSO8
Part Image MAX3471EUA+T Maxim Integrated Products

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, CMOS, PDSO8
Part Image MAX3471EUA Maxim Integrated Products

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, CMOS, PDSO8
Part Image MAX3471EUA-T Maxim Integrated Products

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, CMOS, PDSO8
Part Image MAX3471CUA-T Maxim Integrated Products

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, CMOS, PDSO8
For a full list of alternate parts for MAX3471CUA+T, check out Findchips.com