Please enter a minimum 3 letters or numbers
Technical Content
Part Image

MAX3486CSA+ - Analog Devices

Description: MAX3486CSA+, Line Transceiver, RS-485, RS-422 2.5Mbit/s Differential, 3.3 V, 8-Pin SOIC

Download MAX3486CSA+ Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
MAX3486CSA+ - Analog Devices - PCB symbol
click to zoom
PCB Footprints
MAX3486CSA+ - Analog Devices PCB footprint - Small Outline Packages - Small Outline Packages - 8 SO-3
click to zoom
3D Models
MAX3486CSA+ - Analog Devices - 3D model - Small Outline Packages - 8 SO-3
click to zoom

MAX3486CSA+ Details

  • Manufacturer Part Number:

    MAX3486CSA+

  • Brand Name:

    Analog Devices Inc

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    8-SOIC_N-150_MIL

  • Package Description:

    0.150 INCH, SO-8

  • Pin Count:

    8

  • Manufacturer Package Code:

    8-SOIC_N-150_MIL

  • Country Of Origin:

    Japan, Mainland China, Malaysia, Philippines, Singapore, South Korea, Taiwan, Thailand, USA

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.60

  • Date Of Intro:

    1994-12-01

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    9

  • Additional Feature:

    COMMON I/O; 1 RECEIVER ACTIVE UNDER SHUTDOWN; TRISTATABLE RECEIVER

  • Differential Output:

    YES

  • Driver Number of Bits:

    1

  • High Level Input Current-Max:

    0.000002 A

  • Input Characteristics:

    DIFFERENTIAL SCHMITT TRIGGER

  • Interface IC Type:

    LINE TRANSCEIVER

  • Interface Standard:

    EIA-422; EIA-485

  • JESD-30 Code:

    R-PDSO-G8

  • JESD-609 Code:

    e3

  • Length:

    4.9 mm

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    1

  • Number of Terminals:

    8

  • Operating Temperature-Max:

    70 °C

  • Out Swing-Min:

    1.5 V

  • Output Characteristics:

    3-STATE

  • Output Low Current-Max:

    0.0025 A

  • Output Polarity:

    COMPLEMENTARY

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SOP

  • Package Equivalence Code:

    SOP8,.25

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Receive Delay-Max:

    90 ns

  • Receiver Number of Bits:

    1

  • Seated Height-Max:

    1.75 mm

  • Supply Current-Max:

    2.2 mA

  • Supply Voltage-Max:

    3.6 V

  • Supply Voltage-Min:

    3 V

  • Supply Voltage-Nom:

    3.3 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Temperature Grade:

    COMMERCIAL

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    1.27 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Transmit Delay-Max:

    70 ns

  • Width:

    3.9 mm

MAX3486CSA+ Frequently Asked Questions (FAQs)

  • The recommended layout and routing for the MAX3486CSA+ involves keeping the analog and digital grounds separate, using a solid ground plane, and minimizing the length of the traces between the device and the capacitors. Additionally, it's recommended to use a 4-layer PCB with a dedicated power plane and to avoid routing digital signals under the device.
  • To ensure reliable operation of the MAX3486CSA+ in high-temperature environments, it's recommended to follow proper thermal management practices, such as providing adequate heat sinking, using a thermally conductive PCB material, and ensuring good airflow around the device. Additionally, the device should be operated within its specified temperature range and derated accordingly.
  • Using lower or higher value capacitors connected to the VCC and GND pins can affect the device's performance and stability. Lower value capacitors may result in increased noise sensitivity, while higher value capacitors may cause increased power-up time and reduced EMI performance. It's recommended to use the recommended capacitor values specified in the datasheet.
  • To troubleshoot issues with the MAX3486CSA+ not transmitting or receiving data correctly, check the device's power supply, clock signal, and data transmission lines for noise and distortion. Verify that the device is properly configured and that the transmit and receive lines are properly terminated. Also, check for any firmware or software issues that may be causing the problem.
  • When using the MAX3486CSA+ in a system with multiple transceivers, it's essential to ensure that each transceiver has its own dedicated clock signal and that the clock signals are not shared between transceivers. Additionally, proper signal routing and termination should be implemented to minimize crosstalk and noise between the transceivers.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

MAX3486CSA+ Overview

Use the download button to access the MAX3486CSA+ schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MAX34, or try a keyword search, such as Line Driver or Receivers

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Suggested Parts

If you searched for MAX3486CSA+, you might also be interested in these parts:
Part Number
LTC1480IS8#PBF
RSF015N06FRATL
3361P-1-202GLF
TL3305AF160QG
16.000MHz HC49/30/50/-40+85/18pF/ATF
BC33725TFR
RVT1V471M1010
ADM2867EBRNZ
AS6C6416-55BIN

Parts related to MAX3486CSA+

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑

MAX3486CSA+ Alternates

Showing results

Image Part Number Model
Part Image MAX3486CSA+ Maxim Integrated Products

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, CMOS, PDSO8
Part Image SP3494EN-L Sipex Corporation

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BICMOS, PDSO8
Part Image MAX3486CSA-T Maxim Integrated Products

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, CMOS, PDSO8
Part Image SP3494EN Sipex Corporation

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BICMOS, PDSO8
Part Image SP3494CN Sipex Corporation

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BICMOS, PDSO8
For a full list of alternate parts for MAX3486CSA+, check out Findchips.com