Part Image

MAX4692EGE+ - Analog Devices

Description: Low-Voltage 8:1 Mux/Dual 4:1 Mux/Triple SPDT/Quad SPDT in UCSP Package

Download MAX4692EGE+ Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
MAX4692EGE+ - Analog Devices PCB footprint - Quad Flat No-Lead - Quad Flat No-Lead - 16 QFN-EP height 0.9
click to zoom

MAX4692EGE+ Details

  • Manufacturer Part Number:

    MAX4692EGE+

  • Brand Name:

    Analog Devices Inc

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    16-LFCSP-4X4X0.85

  • Package Description:

    4 X 4 MM, ROHS COMPLIANT, QFN-16

  • Pin Count:

    16

  • Manufacturer Package Code:

    16-LFCSP-4X4X0.85

  • Country Of Origin:

    Japan, Mainland China, Malaysia, Philippines, Singapore, South Korea, Taiwan, Thailand, USA

  • HTS Code:

    8542.39.00.60

  • Date Of Intro:

    2001-01-03

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    9

  • Analog IC - Other Type:

    DIFFERENTIAL MULTIPLEXER

  • JESD-30 Code:

    S-XQCC-N16

  • JESD-609 Code:

    e3

  • Length:

    4 mm

  • Moisture Sensitivity Level:

    1

  • Neg Supply Voltage-Max (Vsup):

    -5.5 V

  • Neg Supply Voltage-Min (Vsup):

    -2 V

  • Neg Supply Voltage-Nom (Vsup):

    -5 V

  • Normal Position:

    NO

  • Number of Channels:

    4

  • Number of Functions:

    1

  • Number of Terminals:

    16

  • Off-state Isolation-Nom:

    82 dB

  • On-state Resistance Match-Nom:

    2 Ω

  • On-state Resistance-Max (Ron):

    25 Ω

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Output:

    COMMON OUTPUT

  • Package Body Material:

    UNSPECIFIED

  • Package Code:

    HVQCCN

  • Package Equivalence Code:

    LCC16,.16SQ,25

  • Package Shape:

    SQUARE

  • Package Style:

    CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    0.9 mm

  • Signal Current-Max:

    0.02 A

  • Supply Current-Max (Isup):

    0.001 mA

  • Supply Voltage-Max (Vsup):

    5.5 V

  • Supply Voltage-Min (Vsup):

    2 V

  • Supply Voltage-Nom (Vsup):

    5 V

  • Surface Mount:

    YES

  • Switch-off Time-Max:

    60 ns

  • Switch-on Time-Max:

    90 ns

  • Switching:

    BREAK-BEFORE-MAKE

  • Technology:

    BICMOS

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    NO LEAD

  • Terminal Pitch:

    0.65 mm

  • Terminal Position:

    QUAD

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Width:

    4 mm

MAX4692EGE+ Frequently Asked Questions (FAQs)

  • The recommended PCB layout for the MAX4692EGE+ is to keep the input and output traces as short as possible, and to use a solid ground plane to reduce noise and EMI. Additionally, it's recommended to place a 0.1uF bypass capacitor between the VCC and GND pins, and to use a 1kΩ to 10kΩ resistor in series with the input signal to prevent overvoltage.
  • To ensure the MAX4692EGE+ is properly powered, make sure to connect the VCC pin to a stable 2.7V to 5.5V power supply, and the GND pin to a solid ground plane. Also, ensure that the power supply can provide enough current to drive the load, and that the voltage drop across the device is within the specified limits.
  • The maximum operating frequency of the MAX4692EGE+ is 100kHz, but it can be operated at higher frequencies with reduced performance. It's recommended to consult the datasheet and application notes for more information on frequency response and bandwidth.
  • To protect the MAX4692EGE+ from overvoltage and ESD, use a voltage clamp or a transient voltage suppressor (TVS) diode on the input pins, and ensure that the device is handled and stored in an ESD-safe environment. Additionally, use a 1kΩ to 10kΩ resistor in series with the input signal to prevent overvoltage.
  • The typical output impedance of the MAX4692EGE+ is around 100Ω, but it can vary depending on the output voltage and load conditions. It's recommended to consult the datasheet and application notes for more information on output impedance and load driving capability.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

MAX4692EGE+ Overview

Use the download button to access the MAX4692EGE+ schematic symbol and PCB footprint.
To find more CAD model downloads similar to this part, try a partial part number search, like MAX46, or try a keyword search, such as Multiplexers or Switches

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to MAX4692EGE+

Showing 0 results

MAX4692EGE+ Alternates

Showing results

Image Part Number Model
Part Image MAX4692EGE+T Analog Devices Inc

Single-Ended Multiplexer, 2 Func, 4 Channel, BICMOS, PQCC16

Part Image MAX4692EGE+ Maxim Integrated Products

Differential Multiplexer, 1 Func, 4 Channel, BICMOS, QCC16

Part Image MAX4692EGE+T Maxim Integrated Products

Single-Ended Multiplexer, 2 Func, 4 Channel, BICMOS, PQCC16

Part Image MAX4692EGE-T Maxim Integrated Products

Differential Multiplexer, 2 Func, 4 Channel, CMOS, PQCC16

Part Image MAX4692EGE Maxim Integrated Products

Differential Multiplexer, 1 Func, 4 Channel, BICMOS, QCC16

For a full list of alternate parts for MAX4692EGE+, check out Findchips.com