Please enter a minimum 3 letters or numbers
Technical Content
Part Image

MAX4885ETJ+T - Analog Devices

Description: MAXIM INTEGRATED PRODUCTS - MAX4885ETJ+T - MULTIPLEXER, 350MHZ, -40DB, TQFN-32

Download MAX4885ETJ+T Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
MAX4885ETJ+T - Analog Devices - PCB symbol
click to zoom
PCB Footprints
MAX4885ETJ+T - Analog Devices PCB footprint - Quad Flat No-Lead - Quad Flat No-Lead - 32 TQFN-EP
click to zoom
3D Models
MAX4885ETJ+T - Analog Devices - 3D model - Quad Flat No-Lead - 32 TQFN-EP
click to zoom

MAX4885ETJ+T Details

  • Manufacturer Part Number:

    MAX4885ETJ+T

  • Brand Name:

    Analog Devices Inc

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    32-LFCSP-5X5X0.75

  • Package Description:

    HVQCCN, LCC32,.2SQ,20

  • Pin Count:

    32

  • Manufacturer Package Code:

    32-LFCSP-5X5X0.75

  • Reach Compliance Code:

    Compliant

  • Country Of Origin:

    Japan, Mainland China, Malaysia, Philippines, Singapore, South Korea, Taiwan, Thailand, USA

  • HTS Code:

    8542.39.00.60

  • Date Of Intro:

    2006-05-22

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    10

  • Analog IC - Other Type:

    VIDEO MULTIPLEXER

  • JESD-30 Code:

    S-XQCC-N32

  • JESD-609 Code:

    e3

  • Length:

    5 mm

  • Moisture Sensitivity Level:

    1

  • Normal Position:

    NC

  • Number of Channels:

    2

  • Number of Functions:

    1

  • Number of Terminals:

    32

  • Off-state Isolation-Nom:

    40 dB

  • On-state Resistance Match-Nom:

    0.5 Ω

  • On-state Resistance-Max (Ron):

    7.5 Ω

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Output:

    SEPARATE OUTPUT

  • Package Body Material:

    UNSPECIFIED

  • Package Code:

    HVQCCN

  • Package Equivalence Code:

    LCC32,.2SQ,20

  • Package Shape:

    SQUARE

  • Package Style:

    CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    0.8 mm

  • Supply Current-Max (Isup):

    0.5 mA

  • Supply Voltage-Max (Vsup):

    5.5 V

  • Supply Voltage-Min (Vsup):

    4.5 V

  • Supply Voltage-Nom (Vsup):

    5 V

  • Surface Mount:

    YES

  • Switch-off Time-Max:

    100 ns

  • Switch-on Time-Max:

    7000 ns

  • Switching:

    BREAK-BEFORE-MAKE

  • Technology:

    BICMOS

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    NO LEAD

  • Terminal Pitch:

    0.5 mm

  • Terminal Position:

    QUAD

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Width:

    5 mm

MAX4885ETJ+T Frequently Asked Questions (FAQs)

  • A good PCB layout for the MAX4885ETJ+T involves keeping the analog and digital grounds separate, using a solid ground plane, and placing the device close to the signal sources. Additionally, it's recommended to use a 4-layer PCB with a dedicated power plane and to avoid routing high-frequency signals near the device.
  • The MAX4885ETJ+T requires a single 3.3V or 5V power supply. It's recommended to use a low-dropout linear regulator (LDO) to power the device. Power sequencing is not critical, but it's recommended to power up the device after the power supply has stabilized.
  • The maximum cable length supported by the MAX4885ETJ+T depends on the signal frequency and the cable characteristics. As a general rule, the cable length should be limited to 10 meters or less to ensure signal integrity. Longer cables may require the use of repeaters or signal conditioning circuits.
  • To troubleshoot common issues with the MAX4885ETJ+T, start by checking the power supply and ensuring it's stable and within the recommended range. Then, verify the signal integrity by checking the signal amplitude, frequency, and waveform. Use an oscilloscope to visualize the signal and identify any distortions or anomalies. Finally, check the device's configuration and settings to ensure they are correct.
  • Yes, the MAX4885ETJ+T is a high-frequency device and requires careful consideration of EMI/EMC. Use a shielded enclosure, keep the device away from high-frequency sources, and use EMI filters or shielding on the cables. Additionally, follow good PCB design practices, such as using a solid ground plane and avoiding routing high-frequency signals near the device.

Trust Checks

This model has been verified by system checks.
System Verified
Sponsored

MAX4885ETJ+T Overview

Use the download button to access the MAX4885ETJ+T schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MAX48, or try a keyword search, such as Multiplexers or Switches

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to MAX4885ETJ+T

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑

MAX4885ETJ+T Alternates

Showing results

Image Part Number Model
Part Image MAX4885ETJ+T Maxim Integrated Products

Video Multiplexer, 1 Func, 2 Channel, BICMOS, QCC32
Part Image MAX4885ETJ-T Maxim Integrated Products

Video Multiplexer, 1 Func, 2 Channel, BICMOS
Part Image MAX4885ETJ Maxim Integrated Products

Single-Ended Multiplexer, 2 Func, 2 Channel, BICMOS, PQCC32