Please enter a minimum 3 letters or numbers
Technical Content
Part Image

MAX810TEUR+T - Analog Devices

Description: +5V Power-Supply Voltages ● Fully Specified Over Temperature ● Available in Three Output Configurations • Open-Drain RESET Output (MAX803) • Push-Pull RESET Output (MAX809) • Push-Pull RESET Output (MAX810) ● 140ms (min) Power-On-Reset Pulse Width ● 12μA Supply Current ● Guaranteed Reset Valid to VCC = +1V ● Power Supply Transient Immunity ● No External Components ● 3-Pin SC70 and SOT23 Packages ● AEC-Q100 Qualified. Refer to Ordering Information for Specific /V Versions.

Download MAX810TEUR+T Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
MAX810TEUR+T - Analog Devices - PCB symbol
click to zoom
PCB Footprints
MAX810TEUR+T - Analog Devices PCB footprint - SOT23 (3-Pin) - SOT23 (3-Pin) - U3+1_
click to zoom
3D Models
MAX810TEUR+T - Analog Devices - 3D model - SOT23 (3-Pin) - U3+1_
click to zoom

MAX810TEUR+T Details

  • Manufacturer Part Number:

    MAX810TEUR+T

  • Brand Name:

    Analog Devices Inc

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    3-SOT_23-N/A

  • Package Description:

    SOT-23, 3 PIN

  • Pin Count:

    3

  • Manufacturer Package Code:

    3-SOT_23-N/A

  • Reach Compliance Code:

    Compliant

  • Country Of Origin:

    Japan, Mainland China, Malaysia, Philippines, Singapore, South Korea, Taiwan, Thailand, USA

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.60

  • Date Of Intro:

    2001-05-10

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    9

  • Additional Feature:

    MNL RST:N;PW FL IO:N;PRG RST DLY:N;WD:N;WDO:N;WWD:N

  • Adjustable Threshold:

    NO

  • Analog IC - Other Type:

    VOLTAGE SUPERVISOR/RESET IC

  • JESD-30 Code:

    R-PDSO-G3

  • JESD-609 Code:

    e3

  • Length:

    2.92 mm

  • Moisture Sensitivity Level:

    1

  • Number of Channels:

    1

  • Number of Functions:

    1

  • Number of Terminals:

    3

  • Operating Temperature-Max:

    105 °C

  • Operating Temperature-Min:

    -40 °C

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    TSOP

  • Package Equivalence Code:

    TO-236

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE, THIN PROFILE

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    1.12 mm

  • Supply Current-Max (Isup):

    0.1 mA

  • Supply Voltage-Max (Vsup):

    5.5 V

  • Supply Voltage-Min (Vsup):

    1.2 V

  • Supply Voltage-Nom (Vsup):

    3.3 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    0.95 mm

  • Terminal Position:

    DUAL

  • Threshold Voltage-Nom:

    +3.08V

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Width:

    1.3 mm

MAX810TEUR+T Frequently Asked Questions (FAQs)

  • The MAX810TEUR+T is a sensitive device and requires careful layout and placement to ensure optimal performance. It is recommended to place the device close to the power source, use a solid ground plane, and keep the input and output traces short and separate to minimize noise and coupling. Additionally, it is recommended to use a bypass capacitor between the VCC and GND pins to filter out high-frequency noise.
  • The reset pin (RST) of the MAX810TEUR+T is an active-low input that resets the device when pulled low. It is recommended to connect a 1kΩ to 10kΩ pull-up resistor to VCC and a 0.1μF to 1μF capacitor to GND to ensure a clean reset signal. The reset pin should be driven low for at least 100ns to ensure a proper reset.
  • The MAX810TEUR+T is rated for operation over the industrial temperature range of -40°C to +85°C. However, it is recommended to derate the device's performance and ensure proper thermal management to prevent overheating, especially in high-temperature applications.
  • To ensure EMC with the MAX810TEUR+T, it is recommended to use a shielded enclosure, keep the device away from high-frequency sources, and use filtering and shielding on the input and output lines. Additionally, it is recommended to follow good PCB design practices, such as using a solid ground plane, minimizing trace lengths, and using decoupling capacitors.
  • The recommended power-up sequence for the MAX810TEUR+T is to apply power to the VCC pin first, followed by the input voltage (VIN) and any other input signals. This ensures that the device powers up correctly and prevents any potential latch-up or damage.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

MAX810TEUR+T Overview

Use the download button to access the MAX810TEUR+T schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MAX81, or try a keyword search, such as Power Management Circuits

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to MAX810TEUR+T

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑

MAX810TEUR+T Alternates

Showing results

Image Part Number Model
Part Image MAX810TEUR+T10 Maxim Integrated Products

Voltage Supervisor/Reset IC, Fixed, 1 Channel, +3.08V, CMOS, PDSO3
Part Image CAT810TTBI-T onsemi

Voltage Supervisor/Reset IC, Fixed, 1 Channel, PDSO3
Part Image MAX810TEUR-T Rochester Electronics LLC

Voltage Supervisor/Reset IC, Fixed, 1 Channel, PDSO3
Part Image CAT810TEUR-T onsemi

Voltage Supervisor/Reset IC, Fixed, 1 Channel, PDSO3
Part Image CAT810TTBI-T10 onsemi

Voltage Supervisor/Reset IC, Fixed, 1 Channel, +3.08V, PDSO3
For a full list of alternate parts for MAX810TEUR+T, check out Findchips.com