Please enter a minimum 3 letters or numbers
Technical Content
Part Image

MAX96711GTJ+ - Analog Devices

Description: 14-Bit GMSL Serializer with High Immunity/Bandwidth Mode and Coax/STP Cable Drive

Download MAX96711GTJ+ Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
MAX96711GTJ+ - Analog Devices - PCB symbol
click to zoom
PCB Footprints
MAX96711GTJ+ - Analog Devices PCB footprint - Quad Flat No-Lead - Quad Flat No-Lead - T3255+8
click to zoom
3D Models
MAX96711GTJ+ - Analog Devices - 3D model - Quad Flat No-Lead - T3255+8
click to zoom

MAX96711GTJ+ Details

  • Manufacturer Part Number:

    MAX96711GTJ+

  • Brand Name:

    Analog Devices Inc

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    32-LFCSP-5X5X0.75

  • Package Description:

    TQFN-32

  • Pin Count:

    32

  • Manufacturer Package Code:

    32-LFCSP-5X5X0.75

  • Country Of Origin:

    Japan, Mainland China, Malaysia, Philippines, Singapore, South Korea, Taiwan, Thailand, USA

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.60

  • Date Of Intro:

    2016-05-12

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    10

  • Differential Output:

    YES

  • Driver Number of Bits:

    1

  • Input Characteristics:

    DIFFERENTIAL

  • Interface IC Type:

    SERIALIZER

  • Interface Standard:

    GMSL

  • JESD-30 Code:

    S-PQCC-N32

  • Length:

    5 mm

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    1

  • Number of Terminals:

    32

  • Operating Temperature-Max:

    115 °C

  • Operating Temperature-Min:

    -40 °C

  • Out Swing-Min:

    0.24 V

  • Output Characteristics:

    OPEN-DRAIN

  • Output Low Current-Max:

    0.002 A

  • Output Polarity:

    COMPLEMENTARY

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    HWQCCN

  • Package Equivalence Code:

    LCC32,.2SQ,20

  • Package Shape:

    SQUARE

  • Package Style:

    CHIP CARRIER, HEAT SINK/SLUG, VERY VERY THIN PROFILE

  • Peak Reflow Temperature (Cel):

    260

  • Seated Height-Max:

    0.8 mm

  • Supply Current-Max:

    90 mA

  • Supply Voltage-Max:

    1.9 V

  • Supply Voltage-Min:

    1.7 V

  • Supply Voltage-Nom:

    1.8 V

  • Surface Mount:

    YES

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    NO LEAD

  • Terminal Pitch:

    0.5 mm

  • Terminal Position:

    QUAD

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Width:

    5 mm

MAX96711GTJ+ Frequently Asked Questions (FAQs)

  • A good PCB layout for the MAX96711GTJ+ involves keeping the analog and digital grounds separate, using a solid ground plane, and placing the device close to the power supply. Additionally, ensure that the input and output traces are short and well-shielded to minimize noise and electromagnetic interference (EMI).
  • To configure the MAX96711GTJ+ for a specific camera module, refer to the camera module's datasheet for the recommended settings. Typically, you'll need to set the correct clock frequency, data format, and synchronization mode. You may also need to adjust the gain, offset, and black level calibration settings to optimize image quality.
  • The maximum cable length supported by the MAX96711GTJ+ depends on the specific application and the type of cable used. As a general guideline, the device can support cable lengths up to 10 meters at a data rate of 1 Gbps. However, it's recommended to consult the datasheet and perform signal integrity simulations to determine the optimal cable length for your specific use case.
  • To troubleshoot issues with the MAX96711GTJ+, start by verifying the power supply and clock signals. Check for proper termination, signal integrity, and electromagnetic interference (EMI) on the input and output lines. Use oscilloscopes and logic analyzers to debug the signal waveforms and data transmission. Consult the datasheet and application notes for specific troubleshooting guidelines and FAQs.
  • The MAX96711GTJ+ is primarily designed for use with the GMSL (Gigabit Multimedia Serial Link) interface. However, it can be used with other camera interfaces, such as MIPI CSI-2 or parallel interfaces, with the help of additional components or interface converters. Consult the datasheet and application notes for specific guidance on using the MAX96711GTJ+ with other interfaces.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

MAX96711GTJ+ Overview

Use the download button to access the MAX96711GTJ+ schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MAX96, or try a keyword search, such as Line Driver or Receivers

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to MAX96711GTJ+

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑

MAX96711GTJ+ Alternates

Showing results

Image Part Number Model
Part Image MAX96711GTJ/V+ Analog Devices Inc

SERIALIZER, 1 Func, 1 Driver, PQCHIP CARRIER, HEAT SINK/SLUG, VERY VERY THIN PROFILE32
Part Image MAX96711GTJ/V+T Maxim Integrated Products

Line Driver
Part Image MAX96711GTJ+ Maxim Integrated Products

Line Driver
Part Image MAX96711GTJ+T Maxim Integrated Products

Line Driver
Part Image MAX96711GTJ/V+ Maxim Integrated Products

Line Driver
For a full list of alternate parts for MAX96711GTJ+, check out Findchips.com