Description:Low Profile - Maximum Height of 1.1 mm; Small Footprint - Footprint Area of 8.45 mm2; Low VF Provides Higher Efficiency and Extends Battery Life; Supplied in 12 mm Tape and Reel; Low Thermal Resistance with Direct Thermal Path of Die on Exposed Cathode Heat Sink Mechanical Characteristics:; Powermite is JEDEC Registered as DO-216AA; Case: Molded Epoxy; Epoxy Meets UL94V-0 at 1/8"; Weight: 62 mg (approximately); Device Marking: BCV; Lead and Mounting Surface Temperature for Soldering Purposes. 260°C Maximum
For optimal performance, it is recommended to follow the PCB layout guidelines provided in the onsemi application note AND9393-D. Additionally, ensure good thermal management by providing a heat sink or thermal pad under the device, and using thermal vias to dissipate heat efficiently.
The input capacitor selection depends on the input voltage, output voltage, and output current requirements. A general guideline is to choose a capacitor with a voltage rating of at least 1.5 times the input voltage, and a capacitance value between 1uF to 10uF. Consult the onsemi application note AND9393-D for more detailed guidance.
The NRVBM120ET1G can withstand a maximum voltage stress of 150% of the nominal input voltage during startup or shutdown. However, it is recommended to limit the voltage stress to 120% of the nominal input voltage to ensure reliable operation and minimize wear-out.
To ensure EMC, follow the layout guidelines provided in the onsemi application note AND9393-D, and use a shielded inductor and input capacitor. Additionally, consider adding EMI filters or common-mode chokes to the input and output lines to reduce electromagnetic interference.
The recommended operating temperature range for the NRVBM120ET1G is -40°C to 125°C. However, the device can operate up to 150°C with derated performance. Consult the onsemi datasheet for more detailed information on temperature derating.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
NRVBM120ET1G Overview
Use the download button to access the NRVBM120ET1G 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like NRVBM,
or try a keyword search, such as Rectifier Diodes
