SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE AND RESISTOR
DS Breakdown Voltage-Min:
30 V
Drain Current-Max (ID):
0.25 A
Drain-source On Resistance-Max:
2.5 Ω
FET Technology:
METAL-OXIDE SEMICONDUCTOR
Feedback Cap-Max (Crss):
12 pF
JESD-30 Code:
R-PDSO-G6
JESD-609 Code:
e3
Moisture Sensitivity Level:
1
Number of Elements:
2
Number of Terminals:
6
Operating Mode:
ENHANCEMENT MODE
Operating Temperature-Max:
150 °C
Package Body Material:
PLASTIC/EPOXY
Package Shape:
RECTANGULAR
Package Style:
SMALL OUTLINE
Peak Reflow Temperature (Cel):
260
Polarity/Channel Type:
N-CHANNEL
Power Dissipation-Max (Abs):
0.272 W
Qualification Status:
Not Qualified
Surface Mount:
YES
Terminal Finish:
Tin (Sn)
Terminal Form:
GULL WING
Terminal Position:
DUAL
Time@Peak Reflow Temperature-Max (s):
30
Transistor Application:
SWITCHING
Transistor Element Material:
SILICON
NTJD4001NT2G Frequently Asked Questions (FAQs)
A good PCB layout for optimal thermal performance involves placing the device near the edge of the board, using a large copper area for heat dissipation, and minimizing thermal vias. A 2-3 layer board with a solid ground plane is recommended. Refer to onsemi's application note AND8393/D for more details.
To ensure reliable operation at high temperatures, follow the recommended operating conditions, use a suitable heat sink, and ensure good thermal interface material (TIM) between the device and heat sink. Also, consider derating the device's power dissipation at high temperatures.
The maximum allowed voltage on the input pins is the voltage rating of the device, which is 40V for the NTJD4001NT2G. However, it's recommended to keep the input voltage within the recommended operating range to ensure reliable operation and prevent damage.
Yes, the NTJD4001NT2G can be used in switching regulator applications. However, it's essential to ensure that the device is operated within its recommended switching frequency range (typically up to 500 kHz) and that the output voltage is properly filtered to prevent ringing and oscillations.
To calculate the power dissipation of the NTJD4001NT2G, use the following formula: Pd = (Vin - Vout) x Iout x Efficiency. Where Vin is the input voltage, Vout is the output voltage, Iout is the output current, and Efficiency is the device's efficiency (typically around 95-98%).
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
NTJD4001NT2G Overview
Use the download button to access the NTJD4001NT2G 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like NTJD4,
or try a keyword search, such as Small Signal Field-Effect Transistors
