TTL COMPATIBLE MUX/DMUX SWITCH; MAX RON = 15 OHM @ VIN 2.4V & ION = 15MA
Family:
CBT/FST/QS/5C/B
JESD-30 Code:
R-PDSO-G16
JESD-609 Code:
e3
Length:
4.9 mm
Load Capacitance (CL):
50 pF
Logic IC Type:
BUS EXCHANGER
Moisture Sensitivity Level:
1
Number of Bits:
4
Number of Functions:
2
Number of Ports:
5
Number of Terminals:
16
Operating Temperature-Max:
85 °C
Operating Temperature-Min:
-40 °C
Output Characteristics:
3-STATE
Output Polarity:
TRUE
Package Body Material:
PLASTIC/EPOXY
Package Code:
SSOP
Package Equivalence Code:
SSOP16,.25
Package Shape:
RECTANGULAR
Package Style:
SMALL OUTLINE, SHRINK PITCH
Propagation Delay (tpd):
0.25 ns
Qualification Status:
Not Qualified
Seated Height-Max:
1.75 mm
Supply Voltage-Max (Vsup):
5.25 V
Supply Voltage-Min (Vsup):
4.75 V
Supply Voltage-Nom (Vsup):
5 V
Surface Mount:
YES
Technology:
CMOS
Temperature Grade:
INDUSTRIAL
Terminal Finish:
MATTE TIN
Terminal Form:
GULL WING
Terminal Pitch:
0.635 mm
Terminal Position:
DUAL
Width:
3.9 mm
PI5C3253QEX Frequently Asked Questions (FAQs)
A good PCB layout for the PI5C3253QEX involves keeping the signal traces short and direct, using a solid ground plane, and placing decoupling capacitors close to the device. It's also recommended to use a 4-layer PCB with a dedicated power plane and a dedicated ground plane.
The PI5C3253QEX requires a single 3.3V power supply. It's recommended to power the device using a low-dropout regulator (LDO) with a high power supply rejection ratio (PSRR) to minimize noise. The power sequencing requirement is to power up the device after the power supply has stabilized.
The PI5C3253QEX can operate up to 250 MHz, but the actual frequency of operation depends on the specific application and the quality of the PCB layout.
To troubleshoot issues with the PI5C3253QEX, use a logic analyzer or an oscilloscope to capture the signal waveforms and analyze them for any anomalies. Check the PCB layout for any signal integrity issues, and verify that the power supply is stable and within the recommended range.
The PI5C3253QEX has a maximum junction temperature of 150°C. To ensure reliable operation, it's recommended to keep the device temperature below 100°C. Use thermal vias and a heat sink if necessary, and ensure good airflow around the device.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
PI5C3253QEX Overview
Use the download button to access the PI5C3253QEX 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like PI5C3,
or try a keyword search, such as Bus Driver/Transceivers
