Part Image

QS3306AS1G8 - Renesas Electronics

Description: The QS3306A provides a set of two high-speed low resistance (3 ohm typical) CMOS switches connecting inputs to outputs without propagation delay and without generating additional ground bounce noise. Individual enables (OE) are used to turn on the switches. The QS3306A is ideal for signal and control switching since the device adds no noise, ground bounce, propagation delay, or significant power consumption to the system. The QS3306A can also be used for analog switching applications such as video. The QS33

Download QS3306AS1G8 Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
QS3306AS1G8 - Renesas Electronics PCB footprint - Small Outline Packages - Small Outline Packages - DCG8
click to zoom
3D Models
QS3306AS1G8 - Renesas Electronics  - 3D model - Small Outline Packages - DCG8
click to zoom

QS3306AS1G8 Details

  • Manufacturer Part Number:

    QS3306AS1G8

  • Brand Name:

    Renesas

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Obsolete

  • Part Package Code:

    SOIC

  • Package Description:

    SOIC-8

  • Pin Count:

    8

  • Manufacturer Package Code:

    DCG8

  • Country Of Origin:

    Philippines, Taiwan

  • HTS Code:

    8542.39.00.01

  • Factory Lead Time:

    4 Weeks

  • Manufacturer:

    Renesas Electronics Corporation

  • YTEOL:

    0

  • Control Type:

    ENABLE LOW

  • Count Direction:

    UNIDIRECTIONAL

  • Family:

    3306

  • JESD-30 Code:

    R-PDSO-G8

  • JESD-609 Code:

    e3

  • Length:

    4.9276 mm

  • Load Capacitance (CL):

    50 pF

  • Logic IC Type:

    BUS DRIVER

  • Moisture Sensitivity Level:

    1

  • Number of Bits:

    1

  • Number of Functions:

    2

  • Number of Ports:

    2

  • Number of Terminals:

    8

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Output Characteristics:

    3-STATE

  • Output Polarity:

    TRUE

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SOP

  • Package Equivalence Code:

    SOP8,.25

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE

  • Packing Method:

    TR, 13 INCH

  • Peak Reflow Temperature (Cel):

    260

  • Prop. Delay@Nom-Sup:

    0.25 ns

  • Propagation Delay (tpd):

    0.25 ns

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    1.7272 mm

  • Supply Voltage-Max (Vsup):

    5.25 V

  • Supply Voltage-Min (Vsup):

    4.75 V

  • Supply Voltage-Nom (Vsup):

    5 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    MATTE TIN

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    1.27 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Width:

    3.937 mm

QS3306AS1G8 Frequently Asked Questions (FAQs)

  • A 4-layer PCB with a solid ground plane and a separate power plane is recommended. Keep the analog and digital grounds separate and connect them at a single point. Use a decoupling capacitor (e.g., 10uF) close to the VCC pin.
  • Apply power to VCC and GND pins simultaneously. Ensure the power supply is stable and within the recommended voltage range (1.65V to 3.6V). Wait for the internal reset to complete (typically 10ms) before accessing the device.
  • The QS3306AS1G8 supports clock frequencies up to 32 kHz. However, the maximum frequency may vary depending on the specific application and operating conditions.
  • The QS3306AS1G8 has a built-in brown-out detection circuit. When VCC falls below the brown-out detection threshold (typically 1.5V), the device resets. Ensure your system design can handle this reset and subsequent power-up sequence.
  • The QS3306AS1G8 has a maximum junction temperature of 150°C. Ensure good thermal conductivity between the device and the PCB. Use thermal vias and a heat sink if necessary. Keep the device away from heat sources and ensure good airflow.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

QS3306AS1G8 Overview

Use the download button to access the QS3306AS1G8 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like QS330, or try a keyword search, such as Bus Driver/Transceivers

Parts related to QS3306AS1G8

Showing 0 results

QS3306AS1G8 Alternates

Showing results

Image Part Number Model
Part Image QS3306AS1G Integrated Device Technology Inc

Bus Driver, 3306 Series, 2-Func, 1-Bit, True Output, CMOS, PDSO8

Part Image CBTD3306D-T NXP Semiconductors

Bus Driver, CBT/FST/QS/5C/B Series, 2-Func, 1-Bit, True Output, PDSO8

Part Image 935270513118 NXP Semiconductors

Bus Driver, 2-Func, 1-Bit, True Output, PDSO8

Part Image SN74CBT3306DRE4 Texas Instruments

Bus Driver, CBT/FST/QS/5C/B Series, 2-Func, 1-Bit, True Output, CMOS, PDSO8

Part Image SN74CBT3306DE4 Texas Instruments

Bus Driver, CBT/FST/QS/5C/B Series, 2-Func, 1-Bit, True Output, CMOS, PDSO8

For a full list of alternate parts for QS3306AS1G8, check out Findchips.com