The recommended PCB footprint for the VS-60EPU06L-N3 is a rectangular pad with a minimum size of 6.5mm x 3.5mm, with a 1.5mm x 1.5mm thermal pad in the center. The pad should have a solder mask defined (SMD) and a non-solder mask defined (NSMD) area around the thermal pad.
To ensure reliable soldering, use a soldering iron with a temperature range of 250°C to 260°C, and a solder with a melting point of 217°C to 220°C. Apply a small amount of solder paste to the PCB pads, and use a reflow oven or a hot air gun to solder the component. Avoid using excessive solder or flux, as it can cause bridging or shorts.
The maximum operating temperature range for the VS-60EPU06L-N3 is -40°C to 150°C. However, the device's performance and reliability may degrade if operated at temperatures above 125°C for extended periods.
The VS-60EPU06L-N3 is not designed for use in high-humidity environments. It is recommended to use a conformal coating or potting compound to protect the device from moisture and humidity. Additionally, ensure that the PCB is designed with moisture-resistant materials and follows proper humidity-resistant design practices.
The VS-60EPU06L-N3 is an ESD-sensitive device. Handle the device with ESD-protective equipment, such as wrist straps, mats, and bags. Ensure that the PCB design includes ESD protection components, such as TVS diodes or ESD protection arrays, to prevent damage from electrostatic discharge.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
VS-60EPU06L-N3 Overview
Use the download button to access the VS-60EPU06L-N3 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like VS-60,
or try a keyword search, such as Rectifier Diodes
