Description:The Intersil X9315 is a digitally controlled potentiometer (XDCP). The device consists of a resistor array, wiper switches, a control section, and nonvolatile memory. The wiper position is controlled by a 3-wire interface. The potentiometer is implemented by a resistor array composed of 31 resistive elements and a wiper switching network. Between each element and at either end are tap points accessible to the wiper terminal. The position of the wiper element is controlled by the CS, U/D, and INC inputs. The
Renesas provides a recommended PCB layout guide in their application note (AP-AN-1143) which includes guidelines for component placement, routing, and thermal management to ensure optimal performance and minimize noise.
The X9315WMIZ-2.7T1 has an internal POR and BOR circuitry. To handle these, ensure that the power supply is stable and within the recommended voltage range. Also, use an external capacitor (e.g., 10nF) between the VCC and GND pins to filter out noise and ensure a clean power-on reset.
Although the datasheet specifies an operating temperature range of -40°C to 85°C, Renesas recommends derating the device's performance at extreme temperatures. For reliable operation, it's recommended to operate the device within -20°C to 70°C.
The X9315WMIZ-2.7T1 has a built-in WDT. To implement it, configure the WDT register (WDTCON) to set the timeout period and enable the WDT. The WDT will reset the device if the software fails to refresh the WDT within the set timeout period.
To ensure EMC and minimize EMI, follow Renesas' guidelines for PCB layout, component selection, and shielding. Use a ground plane, decouple power supplies, and use EMI filters or ferrite beads on I/O lines. Also, ensure that the device is operated within the recommended frequency range.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
X9315WMIZ-2.7T1 Overview
Use the download button to access the X9315WMIZ-2.7T1 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like X9315,
or try a keyword search, such as Digital Potentiometers
