The recommended land pattern for the 1206L010/30WR is a rectangular pad with a size of 1.3mm x 2.5mm, with a solder mask clearance of 0.1mm. This can be found in the Littelfuse application note AN9313.
The 1206L010/30WR is rated for operation up to 150°C, but it's recommended to derate the current rating above 125°C. Consult the datasheet for derating curves and consult with a Littelfuse application engineer for specific guidance.
To select the correct fuse, consider the maximum current, voltage, and power rating of your circuit. Also, consider the fault current, fault duration, and the required interrupting rating. Consult the Littelfuse fuse selection guide or consult with a Littelfuse application engineer for specific guidance.
Yes, the 1206L010/30WR is compatible with lead-free soldering processes, with a peak reflow temperature of 260°C. Consult the Littelfuse application note AN9313 for more information on lead-free soldering.
The typical time-to-blow for the 1206L010/30WR is around 1-2 seconds at 30A, but this can vary depending on the fault current and circuit conditions. Consult the datasheet for more information on the fuse's time-current characteristic.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
1206L010/30WR Overview
Use the download button to access the 1206L010/30WR schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like 1206L,
or try a keyword search, such as Non-linear Resistors
