ROHM recommends a thermal pad on the bottom of the package, connected to a large copper area on the PCB to dissipate heat efficiently. A minimum of 2oz copper thickness is recommended.
Ensure proper heat sinking, use a thermally conductive interface material, and follow the recommended derating curves for temperature and current. Also, consider using a thermistor or thermal sensor to monitor the device temperature.
The maximum allowed voltage on the gate pin is ±20V, but it's recommended to keep it within ±15V to ensure reliable operation and prevent damage to the device.
Yes, the 2SCR372PT100Q is suitable for switching applications, but ensure that the switching frequency is within the recommended range (typically up to 100kHz) and follow the recommended gate drive circuitry to minimize switching losses.
ROHM recommends using ESD protection devices, such as TVS diodes or ESD arrays, on the input and output pins to prevent damage from electrostatic discharge. Follow proper handling and storage procedures to minimize ESD risks.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
2SCR372PT100Q Overview
Use the download button to access the 2SCR372PT100Q 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like 2SCR3,
or try a keyword search, such as Small Signal Bipolar Transistors
