ABLNO-156.250MHZ footprint, schematic symbol and 3D model by ABRACON

Symbol

PCB Footprints

3D Models

ABLNO-156.250MHZ Details

Abracon recommends a ground plane underneath the oscillator, with a minimum of 10 mils clearance around the device. A 0.1uF decoupling capacitor between VCC and GND, and a 10nF capacitor between XTAL_IN and GND are also recommended.
Ensure the power supply is stable and within the recommended voltage range. Add a 1kΩ resistor in series with the XTAL_IN pin to prevent overdriving the oscillator. Also, ensure the load capacitance is within the recommended range (15pF to 30pF).
The ABLNO-156.250MHZ is rated for operation from -40°C to +85°C. However, the frequency stability and accuracy may degrade at extreme temperatures.
No, the ABLNO-156.250MHZ is a fixed-frequency oscillator and cannot be adjusted to produce a different frequency. You would need to select a different part number or oscillator type that supports frequency adjustment.
The typical current consumption of the ABLNO-156.250MHZ is around 10mA, but this can vary depending on the specific application and operating conditions.

Manufacturer Collaborated

System Verified

Community Approved

Use the download button to access the ABLNO-156.250MHZ schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like ABLNO, or try a keyword search, such as XO

Showing 0 results


Please enter a minimum 3 letters or numbers
← Prev Next →