Please enter a minimum 3 letters or numbers
Technical Content
Part Image

AD7988-5BRMZ-RL7 - Analog Devices

Description: Analog to Digital Converters - ADC 16-Bit 500ksps Ultra Lo Pwr SAR

Download AD7988-5BRMZ-RL7 Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
AD7988-5BRMZ-RL7 - Analog Devices - PCB symbol
click to zoom
PCB Footprints
AD7988-5BRMZ-RL7 - Analog Devices PCB footprint - Small Outline Packages - Small Outline Packages - MSOP-10-ren1
click to zoom
3D Models
AD7988-5BRMZ-RL7 - Analog Devices - 3D model - Small Outline Packages - MSOP-10-ren1
click to zoom

AD7988-5BRMZ-RL7 Details

  • Manufacturer Part Number:

    AD7988-5BRMZ-RL7

  • Brand Name:

    Analog Devices Inc

  • Pbfree Code:

    No

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Package Description:

    MSOP-10

  • Pin Count:

    10

  • Manufacturer Package Code:

    RM-10

  • Country Of Origin:

    Malaysia

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.01

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    10

  • Analog Input Voltage-Max:

    5.1 V

  • Conversion Time-Max:

    1.6 µs

  • Converter Type:

    ADC, SUCCESSIVE APPROXIMATION

  • JESD-30 Code:

    S-PDSO-G10

  • JESD-609 Code:

    e3

  • Length:

    3 mm

  • Linearity Error-Max (EL):

    0.00191%

  • Moisture Sensitivity Level:

    1

  • Number of Analog In Channels:

    1

  • Number of Bits:

    16

  • Number of Functions:

    1

  • Number of Terminals:

    10

  • Operating Temperature-Max:

    125 °C

  • Operating Temperature-Min:

    -40 °C

  • Output Bit Code:

    BINARY

  • Output Format:

    SERIAL

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    TSSOP

  • Package Equivalence Code:

    TSSOP10,.19,20

  • Package Shape:

    SQUARE

  • Package Style:

    SMALL OUTLINE, THIN PROFILE, SHRINK PITCH

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Sample Rate:

    0.5 MHz

  • Sample and Hold / Track and Hold:

    TRACK

  • Seated Height-Max:

    1.1 mm

  • Supply Current-Max:

    2.5 mA

  • Supply Voltage-Nom:

    2.5 V

  • Surface Mount:

    YES

  • Temperature Grade:

    AUTOMOTIVE

  • Terminal Finish:

    Matte Tin (Sn)

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    0.5 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Width:

    3 mm

AD7988-5BRMZ-RL7 Frequently Asked Questions (FAQs)

  • A good layout and routing practice is to keep the analog and digital grounds separate, use a solid ground plane, and keep the analog and digital signals separate. Also, keep the input signals away from the digital signals and use shielding if possible. Refer to the AD7988-5BRMZ-RL7 evaluation board layout as a reference.
  • The AD7988-5BRMZ-RL7 has an internal calibration circuit that calibrates the device during power-up. No external calibration is required. However, if the device is used in a system that requires calibration, the user can use the CAL pin to initiate calibration. Refer to the datasheet for more information on the calibration procedure.
  • The maximum sampling rate of the AD7988-5BRMZ-RL7 is 1 MSPS. However, the actual sampling rate may be limited by the system's clock frequency, the input signal bandwidth, and the settling time of the input signal. The user should ensure that the input signal is properly filtered and settled before sampling.
  • The AD7988-5BRMZ-RL7 has a built-in POR and BOR circuitry that resets the device during power-up and brown-out conditions. The user should ensure that the power supply is stable and within the recommended operating range to prevent false resets. The user can also use external circuitry to filter the power supply and prevent false resets.
  • A good power supply decoupling and filtering practice is to use a combination of ceramic and electrolytic capacitors to filter the power supply. A 10uF ceramic capacitor and a 10uF electrolytic capacitor in parallel can be used to filter the power supply. The user should also ensure that the power supply is well-regulated and within the recommended operating range.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

AD7988-5BRMZ-RL7 Overview

Use the download button to access the AD7988-5BRMZ-RL7 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like AD798, or try a keyword search, such as Analog to Digital Converters

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to AD7988-5BRMZ-RL7

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑