Please enter a minimum 3 letters or numbers
Technical Content
Part Image

ADS1100A0IDBVT - Texas Instruments

Description: 16-Bit, 128SPS, 1-Ch Delta-Sigma ADC w/ PGA, Oscillator & I2C

Download ADS1100A0IDBVT Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
ADS1100A0IDBVT - Texas Instruments - PCB symbol
click to zoom
PCB Footprints
ADS1100A0IDBVT - Texas Instruments PCB footprint - SOT23 (6-Pin) - SOT23 (6-Pin) - DBV0006A
click to zoom
3D Models
ADS1100A0IDBVT - Texas Instruments - 3D model - SOT23 (6-Pin) - DBV0006A
click to zoom

ADS1100A0IDBVT Details

  • Manufacturer Part Number:

    ADS1100A0IDBVT

  • Brand Name:

    Texas Instruments

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    SOT-23

  • Package Description:

    LSSOP-6

  • Pin Count:

    6

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.30

  • Manufacturer:

    Texas Instruments

  • YTEOL:

    15

  • Analog Input Voltage-Max:

    5.5 V

  • Analog Input Voltage-Min:

    -2.5 V

  • Conversion Time-Max:

    5434.78 µs

  • Converter Type:

    ADC, DELTA-SIGMA

  • JESD-30 Code:

    R-PDSO-G6

  • JESD-609 Code:

    e4

  • Length:

    2.9 mm

  • Linearity Error-Max (EL):

    0.0125%

  • Moisture Sensitivity Level:

    1

  • Number of Analog In Channels:

    1

  • Number of Bits:

    16

  • Number of Functions:

    1

  • Number of Terminals:

    6

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Output Bit Code:

    2S COMPLEMENT BINARY

  • Output Format:

    SERIAL

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    LSSOP

  • Package Equivalence Code:

    TSOP6,.11,37

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE, LOW PROFILE, SHRINK PITCH

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Sample Rate:

    0.000128 MHz

  • Seated Height-Max:

    1.45 mm

  • Supply Current-Max:

    0.15 mA

  • Supply Voltage-Min:

    2.7 V

  • Supply Voltage-Nom:

    5 V

  • Surface Mount:

    YES

  • Technology:

    BIPOLAR

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    Nickel/Palladium/Gold (Ni/Pd/Au)

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    0.95 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Width:

    1.6 mm

ADS1100A0IDBVT Frequently Asked Questions (FAQs)

  • The ADS1100A0IDBVT is a high-impedance device, so it's essential to keep the analog input traces as short as possible and away from digital traces. Use a solid ground plane and decouple the power supply lines with capacitors. Place the device close to the analog signal source and use a low-pass filter to reduce noise.
  • The ADS1100A0IDBVT has a built-in calibration feature. Use the CAL pin to initiate calibration, and the device will adjust its gain and offset to optimize performance. You can also use external calibration resistors to fine-tune the gain and offset. Refer to the datasheet for specific calibration procedures.
  • The ADS1100A0IDBVT has a maximum input voltage range of ±VREF (typically ±2.5V). To protect the device from overvoltage, use input protection diodes or voltage-limiting resistors to prevent voltage exceeding the maximum rating. You can also use external voltage clamps or overvoltage protection circuits.
  • To ensure accurate temperature measurement, ensure good thermal coupling between the device and the surrounding environment. Use a thermally conductive material, such as thermal tape or thermal grease, to attach the device to a heat sink or a metal plate. Avoid air gaps and ensure good thermal contact.
  • Power up the device by applying VCC first, followed by the analog input voltage. During power-down, ensure that the analog input voltage is removed before VCC. Use the RESET pin to reset the device. Refer to the datasheet for specific power-up and power-down sequences.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

ADS1100A0IDBVT Overview

Use the download button to access the ADS1100A0IDBVT schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ADS11, or try a keyword search, such as Analog to Digital Converters

About Texas Instruments

Texas Instruments (TI) designs and manufactures semiconductors and integrated circuits for a wide range of applications. The company's product portfolio includes analog chips, which are essential for managing power and signal functions in electronic devices, and embedded processors, which serve as the brains in various systems, enabling functionality in everything from industrial equipment to consumer electronics. TI's innovations in semiconductor technology have made it a leader in the industry.

Parts related to ADS1100A0IDBVT

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑

ADS1100A0IDBVT Alternates

Showing results

Image Part Number Model
Part Image ADS1100A0IDBVTG4 Texas Instruments

ADC, Delta-Sigma, 16-Bit, 1 Func, 1 Channel, Serial Access, Bipolar, PDSO6
Part Image ADS1100A0IDBVRG4 Texas Instruments

ADC, Delta-Sigma, 16-Bit, 1 Func, 1 Channel, Serial Access, Bipolar, PDSO6