Part Image

ADS1605IPAPT - Texas Instruments

Description: 16-bit, 5 MSPS Delta-Sigma, Analog-to-Digital Converter

Download ADS1605IPAPT Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
ADS1605IPAPT - Texas Instruments PCB footprint - Quad Flat Packages - Quad Flat Packages - PAP0064F
click to zoom
3D Models
ADS1605IPAPT - Texas Instruments  - 3D model - Quad Flat Packages - PAP0064F
click to zoom

ADS1605IPAPT Details

  • Manufacturer Part Number:

    ADS1605IPAPT

  • Brand Name:

    Texas Instruments

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    QFP

  • Package Description:

    HTFQFP-64

  • Pin Count:

    64

  • Country Of Origin:

    Taiwan

  • ECCN Code:

    3A991.C.4

  • HTS Code:

    8542.39.00.30

  • Manufacturer:

    Texas Instruments

  • YTEOL:

    15

  • Analog Input Voltage-Max:

    4.7 V

  • Analog Input Voltage-Min:

    -4.401 V

  • Converter Type:

    ADC, DELTA-SIGMA

  • JESD-30 Code:

    S-PQFP-G64

  • JESD-609 Code:

    e4

  • Length:

    10 mm

  • Linearity Error-Max (EL):

    0.0011%

  • Moisture Sensitivity Level:

    3

  • Number of Analog In Channels:

    1

  • Number of Bits:

    16

  • Number of Functions:

    1

  • Number of Terminals:

    64

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Output Bit Code:

    2S COMPLEMENT BINARY

  • Output Format:

    PARALLEL, WORD

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    HTFQFP

  • Package Equivalence Code:

    TQFP64,.47SQ

  • Package Shape:

    SQUARE

  • Package Style:

    FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Sample Rate:

    5 MHz

  • Seated Height-Max:

    1.2 mm

  • Supply Current-Max:

    135 mA

  • Supply Voltage-Min:

    2.7 V

  • Supply Voltage-Nom:

    5 V

  • Surface Mount:

    YES

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    Nickel/Palladium/Gold (Ni/Pd/Au)

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    0.5 mm

  • Terminal Position:

    QUAD

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Width:

    10 mm

ADS1605IPAPT Frequently Asked Questions (FAQs)

  • Texas Instruments recommends a 4-layer PCB with a solid ground plane, and to keep the analog and digital signals separate. The analog signals should be routed close to the ADC, and the digital signals should be routed away from the ADC. Additionally, the power and ground pins should be decoupled with 0.1uF and 10uF capacitors.
  • To optimize the performance of the ADS1605IPAPT in a noisy environment, use a low-pass filter at the input, use a shielded cable, and keep the ADC away from noise sources. Additionally, use a common-mode filter or a differential amplifier to reduce common-mode noise.
  • The recommended clock frequency for the ADS1605IPAPT is between 10MHz to 50MHz. However, the optimal clock frequency depends on the specific application and the desired sampling rate.
  • The ADS1605IPAPT outputs 16-bit data in a binary two's complement format. The output data can be handled by a microcontroller or a digital signal processor. The data can be processed and analyzed using software or firmware.
  • The power consumption of the ADS1605IPAPT depends on the operating frequency and the voltage supply. At a 5V supply and a 10MHz clock frequency, the typical power consumption is around 35mW. However, the power consumption can be reduced by using a lower voltage supply and a lower clock frequency.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

ADS1605IPAPT Overview

Use the download button to access the ADS1605IPAPT schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ADS16, or try a keyword search, such as Analog to Digital Converters

About Texas Instruments

Texas Instruments (TI) designs and manufactures semiconductors and integrated circuits for a wide range of applications. The company's product portfolio includes analog chips, which are essential for managing power and signal functions in electronic devices, and embedded processors, which serve as the brains in various systems, enabling functionality in everything from industrial equipment to consumer electronics. TI's innovations in semiconductor technology have made it a leader in the industry.

Parts related to ADS1605IPAPT

Showing 0 results

ADS1605IPAPT Alternates

Showing results

Image Part Number Model
Part Image ADS1605IPAPR Texas Instruments

ADC, Delta-Sigma, 16-Bit, 1 Func, 1 Channel, Parallel, Word Access, PQFP64

Part Image ADS1605IPAPRG4 Texas Instruments

ADC, Delta-Sigma, 16-Bit, 1 Func, 1 Channel, Parallel, Word Access, PQFP64

Part Image ADS1605IPAPTG4 Texas Instruments

ADC, Delta-Sigma, 16-Bit, 1 Func, 1 Channel, Parallel, Word Access, CMOS, PQFP64