FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH
Peak Reflow Temperature (Cel):
260
Qualification Status:
Not Qualified
Sample Rate:
10 MHz
Seated Height-Max:
1.2 mm
Supply Current-Max:
170 mA
Supply Voltage-Nom:
5 V
Surface Mount:
YES
Technology:
CMOS
Temperature Grade:
INDUSTRIAL
Terminal Finish:
Nickel/Palladium/Gold (Ni/Pd/Au)
Terminal Form:
GULL WING
Terminal Pitch:
0.5 mm
Terminal Position:
QUAD
Time@Peak Reflow Temperature-Max (s):
30
Width:
10 mm
ADS1610IPAPR Frequently Asked Questions (FAQs)
Texas Instruments provides a recommended layout and routing guide in the ADS1610IPAPR evaluation module documentation, which includes guidelines for PCB layout, component placement, and routing to minimize noise and ensure optimal performance.
The ADS1610IPAPR does not require calibration in the classical sense, but it does require a system-level calibration to ensure accurate measurements. This involves adjusting the gain and offset of the ADC using the onboard calibration registers, as well as performing a system-level calibration using an external reference voltage.
The ADS1610IPAPR has a maximum input voltage range of ±VREF (±4.096V typical), but it can be extended to ±10V using an external attenuator or amplifier. However, this requires careful consideration of the input impedance, noise, and distortion to ensure accurate measurements.
The ADS1610IPAPR has internal overvoltage protection up to ±12V, but it's recommended to add external protection circuitry, such as voltage-limiting resistors or diodes, to prevent damage from higher voltage transients or faults.
The recommended clock frequency for the ADS1610IPAPR is between 1 MHz and 20 MHz, with a typical frequency of 10 MHz. However, the clock frequency can be adjusted based on the specific application requirements and noise tolerance.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
ADS1610IPAPR Overview
Use the download button to access the ADS1610IPAPR schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ADS16,
or try a keyword search, such as Analog to Digital Converters
About Texas Instruments
Texas Instruments (TI) designs and manufactures semiconductors and integrated circuits for a wide range of applications. The company's product portfolio includes analog chips, which are essential for managing power and signal functions in electronic devices, and embedded processors, which serve as the brains in various systems, enabling functionality in everything from industrial equipment to consumer electronics. TI's innovations in semiconductor technology have made it a leader in the industry.
