FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH
Peak Reflow Temperature (Cel):
260
Qualification Status:
Not Qualified
Sample Rate:
70 MHz
Sample and Hold / Track and Hold:
SAMPLE
Seated Height-Max:
1.2 mm
Supply Voltage-Nom:
3.3 V
Surface Mount:
YES
Technology:
CMOS
Temperature Grade:
INDUSTRIAL
Terminal Finish:
Nickel/Palladium/Gold (Ni/Pd/Au)
Terminal Form:
GULL WING
Terminal Pitch:
0.5 mm
Terminal Position:
QUAD
Time@Peak Reflow Temperature-Max (s):
30
Width:
12 mm
ADS5273IPFP Frequently Asked Questions (FAQs)
The recommended power-up sequence is to apply the analog power supply (AVDD) first, followed by the digital power supply (DVDD), and then the clock signal. This ensures proper initialization of the device.
To optimize performance, ensure that the analog input signals are properly filtered and terminated, and that the device is operated within the recommended operating conditions. Additionally, use a low-noise power supply, and consider using a separate analog ground plane to reduce digital noise coupling.
The maximum clock frequency is 125 MHz, but it's recommended to use a clock frequency of 100 MHz or less to ensure reliable operation and minimize jitter.
The ADS5273IPFP can be configured for differential or single-ended input operation through the use of external resistors and capacitors. For differential input operation, connect the input signals to the INP and INM pins, and use a differential termination resistor. For single-ended input operation, connect the input signal to the INP pin and use a single-ended termination resistor.
The latency of the ADS5273IPFP is approximately 10 clock cycles, which means that there is a delay of 10 clock cycles between the input signal and the corresponding digital output. This latency should be taken into account when designing the system, especially in applications that require real-time processing or synchronization.
Trust Checks
This model has been verified by system checks.
System Verified
Sponsored
ADS5273IPFP Overview
Use the download button to access the ADS5273IPFP schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ADS52,
or try a keyword search, such as Analog to Digital Converters
About Texas Instruments
Texas Instruments (TI) designs and manufactures semiconductors and integrated circuits for a wide range of applications. The company's product portfolio includes analog chips, which are essential for managing power and signal functions in electronic devices, and embedded processors, which serve as the brains in various systems, enabling functionality in everything from industrial equipment to consumer electronics. TI's innovations in semiconductor technology have made it a leader in the industry.
Suggested Parts
If you searched for ADS5273IPFP, you might also be interested in these parts:
