Please enter a minimum 3 letters or numbers
Technical Content
Part Image

ADS54J54IRGCT - Texas Instruments

Description: Quad-Channel, 14-Bit, 500-MSPS Analog-to-Digital Converter (ADC)

Download ADS54J54IRGCT Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
ADS54J54IRGCT - Texas Instruments - PCB symbol
click to zoom
PCB Footprints
ADS54J54IRGCT - Texas Instruments PCB footprint - Quad Flat No-Lead - Quad Flat No-Lead - RGC0064H
click to zoom
3D Models
ADS54J54IRGCT - Texas Instruments - 3D model - Quad Flat No-Lead - RGC0064H
click to zoom

ADS54J54IRGCT Details

  • Manufacturer Part Number:

    ADS54J54IRGCT

  • Brand Name:

    Texas Instruments

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Package Description:

    VQFN-64

  • ECCN Code:

    3A001.A.5.A.4

  • HTS Code:

    8542.39.00.30

  • Manufacturer:

    Texas Instruments

  • YTEOL:

    15

  • Additional Feature:

    Peak-to-peak input voltage range(V) : 1.25

  • Analog Input Voltage-Max:

    1.25 V

  • Analog Input Voltage-Min:

    -1.25 V

  • Converter Type:

    ADC, PROPRIETARY METHOD

  • JESD-30 Code:

    S-PQCC-N64

  • JESD-609 Code:

    e4

  • Length:

    9 mm

  • Linearity Error-Max (EL):

    0.0181%

  • Moisture Sensitivity Level:

    3

  • Number of Analog In Channels:

    4

  • Number of Bits:

    14

  • Number of Functions:

    1

  • Number of Terminals:

    64

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Output Bit Code:

    OFFSET BINARY, 2S COMPLEMENT BINARY

  • Output Format:

    SERIAL, PARALLEL, WORD

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    HVQCCN

  • Package Shape:

    SQUARE

  • Package Style:

    CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE

  • Peak Reflow Temperature (Cel):

    260

  • Sample Rate:

    500 MHz

  • Sample and Hold / Track and Hold:

    SAMPLE

  • Seated Height-Max:

    1 mm

  • Supply Voltage-Nom:

    1.9 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag)

  • Terminal Form:

    NO LEAD

  • Terminal Pitch:

    0.5 mm

  • Terminal Position:

    QUAD

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Width:

    9 mm

ADS54J54IRGCT Frequently Asked Questions (FAQs)

  • A 4-layer PCB with a solid ground plane and a separate analog ground plane is recommended. Keep the analog and digital grounds separate and connect them at a single point. Use a low-impedance path for the analog signals and keep the digital signals away from the analog signals.
  • Use a low-jitter clock source with a frequency of 2.5 GHz or less. The clock input should be differential and should be terminated with a 100-ohm resistor. The clock signal should be routed close to the device and should not be routed near the analog signals.
  • Use a combination of ceramic and electrolytic capacitors to decouple the power supply. Place a 0.1-uF ceramic capacitor close to the device and a 10-uF electrolytic capacitor further away. Use a low-ESR capacitor for the analog power supply and a separate capacitor for the digital power supply.
  • The device has a thermal pad on the bottom that should be connected to a thermal plane on the PCB. Use a thermal interface material (TIM) to improve heat transfer between the device and the thermal plane. Ensure good airflow around the device to prevent overheating.
  • Use a low-pass filter or a band-pass filter to condition the input signal. The filter should be designed to reject out-of-band noise and to match the input impedance of the device. Use a buffer amplifier if the input signal is weak or if the source impedance is high.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

ADS54J54IRGCT Overview

Use the download button to access the ADS54J54IRGCT schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ADS54, or try a keyword search, such as Analog to Digital Converters

About Texas Instruments

Texas Instruments (TI) designs and manufactures semiconductors and integrated circuits for a wide range of applications. The company's product portfolio includes analog chips, which are essential for managing power and signal functions in electronic devices, and embedded processors, which serve as the brains in various systems, enabling functionality in everything from industrial equipment to consumer electronics. TI's innovations in semiconductor technology have made it a leader in the industry.

Parts related to ADS54J54IRGCT

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑

ADS54J54IRGCT Alternates

Showing results

Image Part Number Model
Part Image ADS54J54IRGCR Texas Instruments

ADC, Proprietary Method, 14-Bit, 1 Func, 4 Channel, Serial, Parallel, Word Access, PQCC64