Texas Instruments recommends a 4-layer PCB with a solid ground plane, and to keep the analog and digital signals separate. The analog input traces should be short and direct, and the digital output traces should be routed away from the analog inputs. Additionally, decoupling capacitors should be placed close to the device's power pins.
The ADS7816UC/2K5 has a built-in POR circuit that resets the device when the power supply voltage rises above 1.5V. To ensure proper operation, the power supply voltage should be ramped up slowly (less than 10ms) and the digital interface should not be accessed until the POR signal is de-asserted. A recommended power-up sequence is to apply the analog power supply (AVCC) first, followed by the digital power supply (DVCC) and then the clock signal.
The maximum sampling rate of the ADS7816UC/2K5 is 250kSPS. However, the actual sampling rate may be limited by the device's power consumption, which increases with the sampling rate. At maximum sampling rate, the device's power consumption is approximately 15mW. To reduce power consumption, the sampling rate can be reduced or the device can be operated in a low-power mode.
The ADS7816UC/2K5 has an internal calibration circuit that can be used to calibrate the device. The recommended calibration procedure is to perform a full-scale calibration by applying a known input voltage to the device and then reading the output code. The device's offset and gain errors can then be calculated and corrected. Additionally, the device's internal calibration circuit can be used to perform a self-calibration procedure.
The recommended input signal conditioning and filtering techniques for the ADS7816UC/2K5 include using a low-pass filter to remove high-frequency noise, a buffer amplifier to drive the input signal, and a voltage divider or attenuator to adjust the input signal level to within the device's input range. Additionally, the input signal should be band-limited to prevent aliasing and ensure accurate conversions.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
ADS7816UC/2K5 Overview
Use the download button to access the ADS7816UC/2K5 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ADS78,
or try a keyword search, such as Analog to Digital Converters
About Texas Instruments
Texas Instruments (TI) designs and manufactures semiconductors and integrated circuits for a wide range of applications. The company's product portfolio includes analog chips, which are essential for managing power and signal functions in electronic devices, and embedded processors, which serve as the brains in various systems, enabling functionality in everything from industrial equipment to consumer electronics. TI's innovations in semiconductor technology have made it a leader in the industry.
