Littelfuse recommends a PCB layout with a solid ground plane, minimal lead lengths, and a Kelvin connection for the sense pins to ensure accurate current measurement and minimize noise.
The AGRF1400-2 has an internal overcurrent detection circuit that triggers a fault signal when the current exceeds the specified threshold. The device will also limit the current to prevent damage, but it's essential to design a suitable overcurrent protection circuit to ensure safe operation.
The response time of the overcurrent detection circuit is typically in the range of 1-2 microseconds, but this can vary depending on the specific application and PCB layout.
The AGRF1400-2 is rated for operation up to 125°C, but it's essential to consider the device's power dissipation and thermal management in high-temperature applications. A suitable heat sink and thermal design may be required to ensure reliable operation.
The AGRF1400-2 has a typical current measurement accuracy of ±3% over the operating temperature range, but this can be affected by factors such as PCB layout, noise, and temperature. Calibration and compensation may be necessary to achieve higher accuracy.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
AGRF1400-2 Overview
Use the download button to access the AGRF1400-2 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like AGRF1,
or try a keyword search, such as Non-linear Resistors
