A good PCB layout for the AHS160-2 involves keeping the sensor and magnet close to the PCB, using a ground plane to reduce noise, and minimizing the distance between the sensor and the microcontroller.
Calibration involves rotating the magnet 360 degrees while taking readings from the sensor, then using the collected data to create a lookup table or algorithm to correct for any non-linearity.
The AHS160-2 is rated for operation from -40°C to 125°C, but it's recommended to derate the sensor's accuracy and linearity at extreme temperatures.
Yes, the AHS160-2 is designed to withstand vibrations up to 10g, but it's essential to ensure the sensor and magnet are securely attached to the PCB and the system is properly damped to minimize vibration-induced errors.
To minimize EMI, use a shielded cable for the sensor's output, keep the sensor and magnet away from high-current carrying wires, and consider adding EMI filters or shielding to the PCB.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
AHS160-2 Overview
Use the download button to access the AHS160-2 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like AHS16,
or try a keyword search, such as Non-linear Resistors
Suggested Parts
If you searched for AHS160-2, you might also be interested in these parts:
