AP5S1-166.000MHZ-LR footprint, schematic symbol and 3D model by ABRACON

Symbol

PCB Footprints

3D Models

AP5S1-166.000MHZ-LR Details

Abracon recommends a layout with a solid ground plane, minimal signal trace length, and a decoupling capacitor (e.g., 10nF) between VCC and GND to ensure stable operation and minimize noise.
The AP5S1-166.000MHZ-LR is rated for operation up to 85°C, but its frequency stability may degrade above 70°C. For high-reliability applications, consider using a temperature-compensated oscillator or a more temperature-stable alternative.
Yes, but ensure that the oscillator's power supply (VCC) is connected to a stable, low-noise power rail. Isolate the oscillator from other power domains using a ferrite bead or a power filter to minimize noise coupling.
The typical start-up time for the AP5S1-166.000MHZ-LR is around 2-5ms, but this can vary depending on the specific application and power supply conditions.
While the AP5S1-166.000MHZ-LR meets general industrial standards, it may not meet the specific requirements of safety-critical applications (e.g., automotive, aerospace, medical). Consult with Abracon Corporation or a qualified engineer to determine the oscillator's suitability for your specific application.

Manufacturer Collaborated

System Verified

Community Approved

Use the download button to access the AP5S1-166.000MHZ-LR schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like AP5S1, or try a keyword search, such as XO

Showing 0 results


Please enter a minimum 3 letters or numbers
← Prev Next →