Abracon recommends a symmetrical layout with the crystal oscillator placed near the center of the PCB, with minimal routing and no vias under the component. A ground plane underneath the component is also recommended.
Use a soldering iron with a temperature of 250°C to 260°C, and apply a small amount of solder paste to the pads. Avoid applying excessive heat or pressure, which can damage the component.
The recommended drive level for the ASA-22.000MHZ-L-T is 1 μW to 10 μW. Exceeding this drive level can reduce the oscillator's lifespan or cause it to malfunction.
Store the crystal oscillator in its original packaging, away from direct sunlight, moisture, and extreme temperatures. Avoid bending, flexing, or applying excessive pressure to the component during handling.
The typical start-up time for the ASA-22.000MHZ-L-T is around 2-5 ms. However, this can vary depending on the specific application and circuit design.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
ASA-22.000MHZ-L-T Overview
Use the download button to access the ASA-22.000MHZ-L-T schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ASA-2,
or try a keyword search, such as XO
