ASA-3.6864MHZ-L-T - ABRACON

ASA-3.6864MHZ-L-T Frequently Asked Questions (FAQs)

• What is the recommended PCB layout for optimal performance?
  Abracon recommends a symmetrical PCB layout with a solid ground plane, and the crystal oscillator should be placed as close as possible to the microcontroller or IC. A minimum of 10 mils (0.25 mm) clearance around the device is recommended.
• How do I handle ESD protection for this device?
  Abracon recommends using ESD protection devices, such as TVS diodes or ESD arrays, on the PCB to protect the crystal oscillator from electrostatic discharge. Additionally, handling the device with an ESD wrist strap or mat is recommended.
• What is the operating temperature range for this device?
  The ASA-3.6864MHZ-L-T has an operating temperature range of -40°C to +85°C. However, it's essential to note that the frequency tolerance and stability may vary outside the recommended operating temperature range.
• Can I use this crystal oscillator in a high-vibration environment?
  Abracon recommends using a vibration-resistant mounting method, such as a rigidly mounted PCB or a vibration-dampening material, to minimize the effects of vibration on the crystal oscillator's performance.
• How do I ensure the crystal oscillator is properly soldered?
  Abracon recommends using a soldering iron with a temperature of 250°C to 260°C, and a soldering time of 3-5 seconds. The device should be handled by the package, not the leads, to prevent damage.