ASCO2-20.000MHZ-EK-T3 footprint, schematic symbol and 3D model by ABRACON

Symbol

PCB Footprints

3D Models

ASCO2-20.000MHZ-EK-T3 Details

Abracon recommends following a standard crystal oscillator layout with a ground plane underneath the device, and keeping the traces as short as possible to minimize noise and radiation. A 4-layer PCB with a dedicated ground plane is recommended.
The ASCO2-20.000MHZ-EK-T3 is rated for operation from -40°C to +85°C, but it's not recommended for use in high-humidity environments without proper protection. Abracon recommends using a conformal coating or potting the device to protect it from moisture.
Abracon recommends using a reflow soldering process with a peak temperature of 260°C for 10-15 seconds. Hand soldering is not recommended. Ensure the PCB is clean and free of oxidation before soldering.
The typical start-up time for the ASCO2-20.000MHZ-EK-T3 is around 2-5 ms, but this can vary depending on the specific application and power supply conditions.
Yes, the ASCO2-20.000MHZ-EK-T3 is suitable for battery-powered devices due to its low power consumption of 1.5mA. However, ensure the power supply is clean and stable to prevent frequency jitter and instability.

Manufacturer Collaborated

System Verified

Community Approved

Use the download button to access the ASCO2-20.000MHZ-EK-T3 schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like ASCO2, or try a keyword search, such as XO

Showing 0 results


Please enter a minimum 3 letters or numbers
← Prev Next →