ASE-8.000MHZ-E-T footprint, schematic symbol and 3D model by ABRACON

Symbol

PCB Footprints

3D Models

ASE-8.000MHZ-E-T Details

Abracon recommends a layout with a solid ground plane underneath the oscillator, and keeping the traces as short as possible to minimize noise and radiation. A 4-layer PCB with a dedicated ground plane is ideal.
Use a soldering iron with a temperature of 250°C to 260°C, and apply a small amount of solder to the pads. Ensure the oscillator is aligned with the pads and avoid applying excessive force, which can damage the device.
The ASE-8.000MHZ-E-T is rated for operation from -40°C to +85°C, but it's recommended to derate the frequency tolerance by 0.05 ppm/°C for temperatures above 70°C.
Yes, the ASE-8.000MHZ-E-T is designed to withstand vibrations up to 10g peak acceleration, but it's recommended to follow Abracon's guidelines for vibration testing and ensure proper PCB mounting and soldering.
Handle the ASE-8.000MHZ-E-T with ESD-protective equipment, such as wrist straps and mats, and ensure the PCB has ESD protection circuitry, such as TVS diodes or ESD-protection ICs, to prevent damage from electrostatic discharge.

Manufacturer Collaborated

System Verified

Community Approved

Use the download button to access the ASE-8.000MHZ-E-T schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like ASE-8, or try a keyword search, such as XO

Showing 0 results


Please enter a minimum 3 letters or numbers
← Prev Next →