ASEMB-11.0592MHZ-LC-T footprint, schematic symbol and 3D model by ABRACON

Symbol

PCB Footprints

3D Models

ASEMB-11.0592MHZ-LC-T Details

Abracon recommends a soldering temperature profile with a peak temperature of 240°C to 250°C, with a dwell time of 1-2 seconds. However, it's essential to consult the specific soldering guidelines provided by Abracon or a qualified engineer to ensure optimal results.
The ASEMB-11.0592MHZ-LC-T oscillator is designed to start oscillating within 10 ms of power-up, and it will continue to oscillate until the power supply drops below 1.5V. During power-down, the oscillator will stop oscillating when the power supply drops below 1.5V.
Abracon provides a recommended PCB layout and land pattern in the datasheet, which includes a minimum pad size of 1.3 mm x 0.8 mm and a recommended solder mask clearance of 0.2 mm. It's essential to follow these guidelines to ensure optimal performance and reliability.
The ASEMB-11.0592MHZ-LC-T oscillator is rated for operation up to 85°C, but it can be used in high-temperature applications with some limitations. Consult Abracon's application notes and thermal management guidelines to ensure the oscillator operates within its specified temperature range.
The ASEMB-11.0592MHZ-LC-T oscillator is designed to provide low phase noise and jitter, with a typical phase noise of -120 dBc/Hz at 10 kHz offset and a typical jitter of 50 ps rms. However, actual performance may vary depending on the specific application and operating conditions.

Manufacturer Collaborated

System Verified

Community Approved

Use the download button to access the ASEMB-11.0592MHZ-LC-T schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like ASEMB, or try a keyword search, such as XO

Showing 0 results


Please enter a minimum 3 letters or numbers
← Prev Next →