Abracon recommends a soldering temperature profile with a peak temperature of 240°C to 250°C, with a dwell time of 1-2 seconds. This ensures reliable solder joints and minimizes thermal stress on the component.
The ASEMB-26.000MHZ-LC-T oscillator is designed to start oscillating within 10ms of power-up, and it will stop oscillating within 10ms of power-down. The oscillator is also designed to be immune to power supply noise and voltage drops.
Abracon recommends a land pattern with a minimum pad size of 1.5mm x 1.5mm, and a PCB layout that minimizes signal traces and vias near the oscillator to reduce noise and interference.
The ASEMB-26.000MHZ-LC-T oscillator is rated for operation up to 85°C, but it can be used in high-temperature applications up to 125°C with some performance degradation. However, it's recommended to consult with Abracon's application engineers for specific guidance on high-temperature applications.
The ASEMB-26.000MHZ-LC-T oscillator is designed to have low phase noise and jitter, with a typical phase noise of -120dBc/Hz at 10kHz offset, and a typical jitter of 10ps RMS. However, the actual performance may vary depending on the specific application and PCB layout.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
ASEMB-26.000MHZ-LC-T Overview
Use the download button to access the ASEMB-26.000MHZ-LC-T schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ASEMB,
or try a keyword search, such as XO
