Abracon recommends a symmetrical PCB layout with a solid ground plane, and the crystal oscillator should be placed as close as possible to the microcontroller or IC. A minimum of 10 mils (0.25 mm) clearance around the device is recommended.
Abracon recommends using ESD protection devices, such as TVS diodes or ESD arrays, on the PCB to protect the ASEMB-33.000MHZ-LC-T from electrostatic discharge. Additionally, handling the device with an ESD wrist strap or mat is recommended.
The ASEMB-33.000MHZ-LC-T is rated for operation from -40°C to +85°C, but it's recommended to derate the frequency tolerance and stability over the full temperature range.
Abracon recommends evaluating the device's performance in a high-vibration environment, as the crystal oscillator's frequency stability may be affected. Additional testing and validation may be required to ensure reliable operation.
Abracon recommends a soldering profile with a peak temperature of 260°C (500°F) for a maximum of 10 seconds, and a ramp-up rate of 3°C/s (5.4°F/s) to minimize thermal shock.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
ASEMB-33.000MHZ-LC-T Overview
Use the download button to access the ASEMB-33.000MHZ-LC-T schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ASEMB,
or try a keyword search, such as XO
