The recommended PCB footprint for the ASMDC125F/33-2 is a rectangular pad with dimensions of 3.5mm x 2.5mm, with a 1.5mm diameter hole in the center for the fuse's leads.
The ASMDC125F/33-2 is rated for operation up to 125°C, but it's recommended to derate the fuse's current rating by 1.5% for every 1°C above 85°C to ensure reliable operation.
To determine the correct fuse value, calculate the maximum current that your circuit can handle, and then select a fuse with a current rating that is at least 1.5 to 2 times the maximum current. Also, consider the fuse's voltage rating, which should be equal to or greater than the circuit voltage.
The ASMDC125F/33-2 has a voltage rating of 33V, making it suitable for low-voltage applications. For high-voltage applications, consider using a fuse with a higher voltage rating, such as the ASMDC125F/63-2, which has a voltage rating of 63V.
The typical response time of the ASMDC125F/33-2 is around 1-2 seconds for currents above the fuse's rated current. However, this time may vary depending on the application and the type of fault.
Trust Checks
This model has been provided by an expert contributor.
Expert Contribution
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
ASMDC125F/33-2 Overview
Use the download button to access the ASMDC125F/33-2 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ASMDC,
or try a keyword search, such as Non-linear Resistors
