ASMT-RA45-AP932 footprint, schematic symbol and 3D model by Avago Technologies

Symbol

PCB Footprints

3D Models

ASMT-RA45-AP932 Details

Manufacturer Part Number:
ASMT-RA45-AP932
Pbfree Code:
Yes
Rohs Code:
Yes
Part Life Cycle Code:
Active
Package Description:
1.60 X 0.80 MM, 0.45 MM HEIGHT, ROHS COMPLIANT, ULTRA THIN PACKAGE-2
Reach Compliance Code:
Compliant
Country Of Origin:
Taiwan
HTS Code:
8541.40.20.00
Manufacturer:
Avago Technologies
YTEOL:
7
Additional Feature:
AEC-Q102
Color:
AMBER
Color@Wavelength:
Amber
Configuration:
SINGLE
Forward Current-Max:
0.02 A
Forward Voltage-Max:
2.4 V
JESD-609 Code:
e4
Lens Type:
UNTINTED DIFFUSED
Luminous Intensity-Min:
0.057 cd
Luminous Intensity-Nom:
90.0 mcd
Mounting Feature:
SURFACE MOUNT
Number of Functions:
1
Number of Terminals:
2
Operating Temperature-Max:
100 °C
Operating Temperature-Min:
-40 °C
Optoelectronic Device Type:
SINGLE COLOR LED
Overall Height:
0.45 mm
Packing Method:
TR, 7 INCH
Peak Wavelength:
593 nm
Reverse Voltage-Max:
5 V
Shape:
RECTANGULAR
Size:
1.1 mm
Surface Mount:
YES
Terminal Finish:
Silver (Ag)
Terminal Pitch:
1.2 mm
Viewing Angle:
145 deg

A 4-layer PCB with a dedicated ground plane and a stack-up of signal-ground-power-ground-signal is recommended. Ensure a solid ground plane under the IC and use a via fence to isolate the radar signal from other components.
Use a patch antenna or a dipole antenna with a gain of 3-5 dBi. Ensure the antenna is impedance-matched to the IC's output impedance (50 ohms). Optimize the antenna's radiation pattern to minimize multipath effects.
Use a 10 uF ceramic capacitor and a 100 nF ceramic capacitor in parallel, placed close to the IC's power pins. Add a ferrite bead or a pi-filter to filter out high-frequency noise.
Use a metal shield around the radar module, ensure a solid ground plane, and use EMI-absorbing materials. Keep the radar module away from other high-frequency components and use a common mode choke to reduce EMI.
Perform a frequency sweep to determine the optimal frequency range. Calibrate the transmitter's power level and the receiver's gain to optimize the signal-to-noise ratio. Use a network analyzer to measure the radar's frequency response.

Community Provided

System Verified

Community Approved

Use the download button to access the ASMT-RA45-AP932 schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like ASMT-, or try a keyword search, such as Visible LEDs

Showing 0 results

Image	Part Number	Model
	ASMT-RA45-AP932 Broadcom Limited Single Color LED, Amber, Untinted Diffused, 1.1mm
	ASMT-RA45 Avago Technologies Single Color LED, Amber, Untinted Diffused, 1.1mm
	ASMT-RA45 Broadcom Limited Single Color LED, Amber, Untinted Diffused, 1.1mm
For a full list of alternate parts for ASMT-RA45-AP932, check out Findchips.com


Please enter a minimum 3 letters or numbers
← Prev Next →