ASV-30.000MHZ-LCS-T footprint, schematic symbol and 3D model by ABRACON

Symbol

PCB Footprints

3D Models

ASV-30.000MHZ-LCS-T Details

Abracon recommends a layout with a ground plane underneath the oscillator, and to keep the traces as short as possible to minimize noise and radiation. A 4-layer PCB with a dedicated ground layer is recommended.
To ensure reliable startup, Abracon recommends a power supply with a low noise floor, a decoupling capacitor of 10nF to 100nF between VCC and GND, and a series resistor of 1kΩ to 10kΩ between the oscillator output and the load.
The ASV-30.000MHZ-LCS-T is rated for operation from -40°C to +85°C, but Abracon recommends derating the frequency tolerance and stability over the full temperature range.
The ASV-30.000MHZ-LCS-T is designed to withstand vibrations up to 10g, but Abracon recommends additional testing and validation for specific vibration profiles and environments.
Abracon recommends using ESD protection devices such as TVS diodes or ESD arrays on the oscillator's input and output pins, and following proper handling and storage procedures to prevent ESD damage.

Manufacturer Collaborated

System Verified

Community Approved

Use the download button to access the ASV-30.000MHZ-LCS-T schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like ASV-3, or try a keyword search, such as XO

Showing 0 results


Please enter a minimum 3 letters or numbers
← Prev Next →