TDK recommends a soldering temperature profile with a peak temperature of 260°C for 10-30 seconds, and a maximum of 3 reflows. However, it's always best to consult the specific soldering guidelines provided by TDK or to consult with their technical support team for more detailed information.
TDK's aluminum electrolytic capacitors, including the B43547A9107M000, are designed to meet the requirements of IEC 60384-4. They are expected to retain at least 85% of their initial capacitance after 2,000 hours of operation at 105°C. However, the actual performance may vary depending on the specific application and environmental conditions. It's recommended to consult TDK's technical support team or to perform accelerated life testing to determine the capacitor's reliability in your specific use case.
The maximum ripple current rating for the B43547A9107M000 capacitor is not explicitly stated in the datasheet. However, according to TDK's general guidelines, the ripple current rating can be calculated using the formula: Irms ≤ √(ΔI² + (Iac²/2)), where ΔI is the peak-to-peak ripple current and Iac is the AC current. It's recommended to consult TDK's technical support team or to perform thorough thermal analysis to determine the maximum ripple current rating for your specific application.
Yes, TDK recommends following general PCB layout guidelines for aluminum electrolytic capacitors, such as placing the capacitor close to the power source, using a large copper area for heat dissipation, and avoiding routing high-frequency signals near the capacitor. Additionally, it's recommended to follow the specific layout guidelines provided in the datasheet or to consult with TDK's technical support team for more detailed information.
The equivalent series resistance (ESR) of the B43547A9107M000 capacitor is not explicitly stated in the datasheet. However, according to TDK's general guidelines, the ESR can be estimated using the formula: ESR = (ΔV / ΔI) × (1 / (2 × π × f × C)), where ΔV is the voltage ripple, ΔI is the current ripple, f is the frequency, and C is the capacitance. It's recommended to consult TDK's technical support team or to perform thorough impedance analysis to determine the ESR for your specific application.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
B43547A9107M000 Overview
Use the download button to access the B43547A9107M000 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like B4354,
or try a keyword search, such as Aluminum Electrolytic Capacitors
About TDK
TDK-Lambda is a global supplier of power supplies and related products. It is a subsidiary of TDK Corporation, a leading electronics company based in Japan. TDK-Lambda specializes in designing and manufacturing a wide range of AC-DC power supplies, DC-DC converters, programmable power supplies, and EMC/EMI filters for various industries and applications.
