A thermal pad on the bottom of the package should be connected to a large copper area on the PCB to dissipate heat efficiently. A minimum of 2oz copper thickness is recommended.
Use a low-pass filter or a ferrite bead in series with the input signal to reduce high-frequency noise. Also, ensure the input signal is within the recommended voltage range.
The maximum allowed voltage on the enable pin (EN) is 6V. Exceeding this voltage may damage the device.
The BCX19T116 is rated for operation up to 125°C. However, the device's performance and reliability may degrade above 85°C. Ensure proper heat sinking and thermal management for high-temperature applications.
Check the input voltage, output load, and feedback resistors for correct configuration. Verify the output voltage is within the specified range. Use an oscilloscope to check for oscillations or noise on the output.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
BCX19T116 Overview
Use the download button to access the BCX19T116 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like BCX19,
or try a keyword search, such as Small Signal Bipolar Transistors
