ROHM provides a recommended PCB layout in their application note AN11984, which includes guidelines for thermal vias, copper pours, and component placement to minimize thermal resistance and ensure reliable operation.
The input capacitor selection depends on the input voltage, output current, and ripple current requirements. ROHM recommends using a low-ESR capacitor with a minimum capacitance of 10uF and a voltage rating of at least 1.5 times the input voltage. Refer to the datasheet and application notes for more detailed guidance.
The maximum output current of the BD37542FS-E2 is 2A, but it's essential to consider the thermal limitations and power dissipation when designing the system. Ensure that the regulator is properly heat-sinked and the output current is within the safe operating area (SOA) to prevent overheating and damage.
The BD37542FS-E2 has a built-in overcurrent protection (OCP) feature that limits the output current to prevent damage. However, if additional protection is required, an external current sense resistor and a comparator or a dedicated OCP IC can be used to detect and respond to overcurrent conditions.
The recommended input voltage range for the BD37542FS-E2 is 4.5V to 18V, but the absolute maximum rating is 20V. Operating the regulator outside the recommended range may affect its performance, reliability, and lifespan.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
BD37542FS-E2 Overview
Use the download button to access the BD37542FS-E2 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like BD375,
or try a keyword search, such as Other Consumer ICs
