ROHM recommends a thermal pad on the bottom of the package, connected to a large copper area on the PCB to dissipate heat efficiently. A 4-layer PCB with a thermal via is also recommended.
To ensure stable operation with a high-capacitance load, add a 1-10uF ceramic capacitor between the VCC and GND pins, and a 1-10nF ceramic capacitor between the VIN and GND pins. This will help reduce voltage fluctuations and ringing.
The maximum allowed voltage on the EN pin is 6V. Exceeding this voltage may damage the device. It's recommended to use a voltage divider or a level shifter if the control signal is higher than 6V.
The BD63740FM-E2 is rated for operation up to 125°C. However, the device's performance and reliability may degrade at high temperatures. It's recommended to derate the output current and voltage according to the temperature derating curve in the datasheet.
To troubleshoot oscillations or instability issues, check the PCB layout for proper decoupling, ensure the input and output capacitors are of sufficient value and type, and verify that the device is operated within its recommended operating conditions. Also, check for any noise or ripple on the input voltage and ensure the device is properly heatsinked.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
BD63740FM-E2 Overview
Use the download button to access the BD63740FM-E2 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like BD637,
or try a keyword search, such as Motion Control Electronics
Suggested Parts
If you searched for BD63740FM-E2, you might also be interested in these parts:
