A recommended PCB layout for optimal thermal performance would be to have a large copper area on the bottom layer connected to the GND pin, and to use thermal vias to dissipate heat. Additionally, keeping the PCB layers as thin as possible and using a thermal interface material can also help.
To ensure stable operation with a high-ESR output capacitor, it's recommended to add a small ceramic capacitor (e.g. 10nF) in parallel with the output capacitor to reduce the overall ESR. Additionally, increasing the output capacitor's capacitance or using a capacitor with a lower ESR can also help.
The maximum allowed voltage on the EN pin is 6V. Exceeding this voltage may damage the device.
The BD6971FV-E2 is rated for operation up to 105°C. However, the device's performance and reliability may degrade at high temperatures. It's recommended to derate the device's specifications and to ensure proper thermal management to prevent overheating.
The output voltage ripple can be calculated using the following formula: ΔVout = (Iout * ESR) / (f * C), where Iout is the output current, ESR is the equivalent series resistance of the output capacitor, f is the switching frequency, and C is the output capacitance.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
BD6971FV-E2 Overview
Use the download button to access the BD6971FV-E2 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like BD697,
or try a keyword search, such as Motion Control Electronics
