ROHM recommends a thermal pad size of 2.5mm x 2.5mm with a minimum of 10 thermal vias (0.3mm diameter) to ensure efficient heat dissipation. Additionally, a solid ground plane on the bottom layer can help reduce thermal resistance.
To ensure stable operation with a high-impedance input source, add a 1kΩ to 10kΩ resistor in series with the input pin to reduce the input impedance. This will help prevent oscillations and improve overall stability.
ROHM recommends using a 1μF to 10μF ceramic capacitor with a voltage rating of 10V or higher, placed as close as possible to the input pin. This helps to filter out noise and ensure stable operation.
To protect the device from overvoltage and ESD, use a TVS (Transient Voltage Suppressor) diode or a zener diode with a voltage rating of 12V or higher, connected between the input pin and the GND pin. This will help clamp voltage transients and prevent damage to the device.
ROHM recommends using a 1μF to 10μF ceramic capacitor with a voltage rating of 10V or higher, placed as close as possible to the output pin. This helps to filter out noise and ensure stable operation.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
BM2P053F-GE2 Overview
Use the download button to access the BM2P053F-GE2 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like BM2P0,
or try a keyword search, such as Other Consumer ICs
