Texas Instruments provides a recommended PCB layout in the datasheet, but it's essential to follow good design practices, such as keeping the high-current paths short and wide, using a solid ground plane, and placing the device near the battery. Additionally, ensure the layout is symmetrical to minimize electromagnetic interference (EMI).
The sense resistor value depends on the desired current sense accuracy and the maximum expected current. A smaller sense resistor value provides better accuracy but increases power loss. A larger value reduces power loss but decreases accuracy. TI recommends using a sense resistor value between 1 mΩ and 10 mΩ. Consult the datasheet for a detailed calculation formula.
The EN (enable) pin is used to enable or disable the device. When EN is high, the device is enabled, and when it's low, the device is disabled. This pin can be used to implement a low-power shutdown mode or to control the device's operation based on system requirements. Ensure the EN pin is properly biased and decoupled to prevent unwanted device behavior.
The BQ29723DSET has built-in OCP and SCP features. To handle these events, connect the OCP and SCP pins to a microcontroller or a dedicated fault handler. When an overcurrent or short-circuit event occurs, the device will assert the OCP or SCP pin, respectively. The system can then respond by shutting down the device, alerting the user, or taking other corrective actions.
The BQ29723DSET has a maximum junction temperature (TJ) of 150°C. Ensure good thermal design practices, such as providing adequate heat sinking, using a thermal pad, and keeping the device away from heat sources. Monitor the device's temperature and adjust the system design accordingly to prevent overheating and ensure reliable operation.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
BQ29723DSET Overview
Use the download button to access the BQ29723DSET schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like BQ297,
or try a keyword search, such as Power Management Circuits
About Texas Instruments
Texas Instruments (TI) designs and manufactures semiconductors and integrated circuits for a wide range of applications. The company's product portfolio includes analog chips, which are essential for managing power and signal functions in electronic devices, and embedded processors, which serve as the brains in various systems, enabling functionality in everything from industrial equipment to consumer electronics. TI's innovations in semiconductor technology have made it a leader in the industry.
