Texas Instruments provides a recommended PCB layout in the datasheet, but it's essential to follow good PCB design practices, such as keeping the high-current paths short and wide, using a solid ground plane, and placing the device close to the battery. Additionally, ensure that the PCB layout is symmetrical to minimize electromagnetic interference (EMI).
The sense resistor value depends on the maximum current and voltage of your application. A general rule of thumb is to choose a sense resistor value that results in a voltage drop of around 50-100 mV at the maximum current. You can use the formula: Rsense = (Vfs / Imax) * (Rds(on) / 2), where Vfs is the full-scale voltage, Imax is the maximum current, and Rds(on) is the on-state resistance of the internal FET.
The EN (enable) pin is used to turn the device on or off. When the EN pin is high, the device is enabled, and when it's low, the device is disabled. You can use the EN pin to implement a low-power shutdown mode or to control the device's operation based on system requirements. Ensure that the EN pin is properly decoupled and driven by a logic signal.
The BQ29732DSER has built-in OCP and SCP features. For OCP, the device will limit the current to the programmed value. For SCP, the device will turn off the internal FET if a short circuit is detected. You can adjust the OCP and SCP thresholds using external resistors. Ensure that your design includes proper fault detection and response mechanisms to handle OCP and SCP events.
The BQ29732DSER has a maximum junction temperature (TJ) of 150°C. Ensure that your design provides adequate thermal dissipation, such as using a heat sink or thermal pad, to keep the device within the recommended operating temperature range. You should also consider the thermal resistance of the PCB and the ambient temperature of the operating environment.
Trust Checks
This model has been provided by an expert contributor.
Expert Contribution
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
BQ29732DSER Overview
Use the download button to access the BQ29732DSER schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like BQ297,
or try a keyword search, such as Power Management Circuits
About Texas Instruments
Texas Instruments (TI) designs and manufactures semiconductors and integrated circuits for a wide range of applications. The company's product portfolio includes analog chips, which are essential for managing power and signal functions in electronic devices, and embedded processors, which serve as the brains in various systems, enabling functionality in everything from industrial equipment to consumer electronics. TI's innovations in semiconductor technology have made it a leader in the industry.
Suggested Parts
If you searched for BQ29732DSER, you might also be interested in these parts:
