A 4-layer PCB with a solid ground plane and a separate power plane is recommended. Keep the clock signal traces short and away from noisy signals. Use a common mode filter or a ferrite bead to reduce EMI.
Use a 50-ohm termination resistor in series with the clock signal line, and a 0.01uF capacitor to ground for AC coupling. This ensures signal integrity and reduces reflections.
The CDCM7005HFG/EM supports clock frequencies up to 700 MHz. However, the maximum frequency may vary depending on the specific application and PCB layout.
Use the CDCM7005HFG/EM's internal PLL to generate the desired clock frequency. Configure the device using the I2C interface, and set the desired frequency using the PLL loop filter and multiplication factors.
The typical power consumption of the CDCM7005HFG/EM is around 150mW at 3.3V supply voltage. However, this may vary depending on the specific application, clock frequency, and output load.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
CDCM7005HFG/EM Overview
Use the download button to access the CDCM7005HFG/EM 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like CDCM7,
or try a keyword search, such as Clock Drivers
About Texas Instruments
Texas Instruments (TI) designs and manufactures semiconductors and integrated circuits for a wide range of applications. The company's product portfolio includes analog chips, which are essential for managing power and signal functions in electronic devices, and embedded processors, which serve as the brains in various systems, enabling functionality in everything from industrial equipment to consumer electronics. TI's innovations in semiconductor technology have made it a leader in the industry.
