MACOM recommends a 4-layer PCB with a solid ground plane, and a thermal pad connected to a heat sink or a thermal via to ensure efficient heat dissipation. A minimum of 1 oz copper thickness is recommended for the top layer.
MACOM provides a set of recommended input and output matching networks in the application note. However, for optimal performance, it's recommended to use a circuit simulator like ADS or AWR to optimize the matching networks based on the specific application and frequency band.
The maximum safe operating temperature for the CG2H40025F is 150°C. However, it's recommended to operate the device at a temperature below 125°C to ensure optimal performance and reliability.
To prevent oscillation and instability, ensure that the input and output matching networks are properly designed and implemented. Also, use a sufficient amount of decoupling capacitors and resistors to prevent unwanted feedback and oscillations.
MACOM recommends a voltage-controlled biasing scheme using a voltage regulator and a resistive divider network to set the gate voltage. The recommended bias voltage is 2.5V to 3.5V, and the recommended drain voltage is 20V to 28V.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
CG2H40025F Overview
Use the download button to access the CG2H40025F 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like CG2H4,
or try a keyword search, such as RF Power Field-Effect Transistors
