The recommended PCB footprint for the CMF075K0000JNEK is a rectangular pad with dimensions of 5.08 mm x 3.81 mm, with a thermal pad of 2.54 mm x 2.54 mm in the center. The pad should have a solder mask defined (SMD) and a non-solder mask defined (NSMD) area for the thermal pad.
To ensure reliable soldering, use a soldering iron with a temperature range of 250°C to 260°C, and a solder with a melting point of 217°C to 220°C. Apply a small amount of solder paste to the PCB pads, and use a reflow oven or a hot air gun to solder the component. Avoid using excessive solder or flux, as it can cause shorts or damage to the component.
The maximum operating temperature range for the CMF075K0000JNEK is -55°C to 150°C. However, the component's performance and reliability may degrade if operated at temperatures above 125°C for extended periods.
Yes, the CMF075K0000JNEK is designed to withstand high-vibration environments. However, it's essential to ensure that the component is properly secured to the PCB using a suitable adhesive or mechanical fastening method to prevent damage or detachment during vibration.
The CMF075K0000JNEK has an internal ESD protection diode, but it's still recommended to follow proper ESD handling procedures when handling the component. Use an ESD wrist strap or mat, and ensure that the PCB and component are properly grounded during assembly and testing.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
CMF075K0000JNEK Overview
Use the download button to access the CMF075K0000JNEK schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like CMF07,
or try a keyword search, such as Metal Film Resistors
