Part Image

DS160PR822NJXT - Texas Instruments

Description: PCI Interface IC PCIe® 4.0, 16 Gbps, 8-channel linear redriver with four 2x2 crosspoint mux 64-WQFN -40 to 85

Download DS160PR822NJXT Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
DS160PR822NJXT - Texas Instruments PCB footprint - Quad Flat No-Lead - Quad Flat No-Lead - NJX0064A
click to zoom
3D Models
DS160PR822NJXT - Texas Instruments  - 3D model - Quad Flat No-Lead - NJX0064A
click to zoom

DS160PR822NJXT Details

  • Manufacturer Part Number:

    DS160PR822NJXT

  • Brand Name:

    Texas Instruments

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.90

  • Manufacturer:

    Texas Instruments

  • YTEOL:

    15

  • Differential Output:

    YES

  • Driver Number of Bits:

    8

  • High Level Input Current-Max:

    0.00001 A

  • Input Characteristics:

    DIFFERENTIAL

  • Interface IC Type:

    LINE DRIVER

  • Interface Standard:

    GENERAL PURPOSE

  • JESD-30 Code:

    R-PQCC-N64

  • JESD-609 Code:

    e4

  • Length:

    10 mm

  • Moisture Sensitivity Level:

    2

  • Number of Channels:

    8

  • Number of Functions:

    8

  • Number of Terminals:

    64

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Out Swing-Min:

    1.7 V

  • Output Characteristics:

    DIFFERENTIAL

  • Output Low Current-Max:

    -0.004 A

  • Output Polarity:

    COMPLEMENTARY

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    HVQCCN

  • Package Equivalence Code:

    LCC64,.21X.39,16

  • Package Shape:

    RECTANGULAR

  • Package Style:

    CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE

  • Peak Reflow Temperature (Cel):

    260

  • Receive Delay-Max:

    0.12 ns

  • Receiver Number of Bits:

    8

  • Seated Height-Max:

    0.8 mm

  • Supply Current-Max:

    360 mA

  • Supply Voltage-Max:

    3.6 V

  • Supply Voltage-Min:

    3 V

  • Supply Voltage-Nom:

    3.3 V

  • Supply Voltage1-Max:

    3.6 V

  • Supply Voltage1-Min:

    3 V

  • Supply Voltage1-Nom:

    3.3 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    Nickel/Palladium/Gold (Ni/Pd/Au)

  • Terminal Form:

    NO LEAD

  • Terminal Pitch:

    0.4 mm

  • Terminal Position:

    QUAD

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Transmit Delay-Max:

    0.12 ns

  • Width:

    5.5 mm

DS160PR822NJXT Frequently Asked Questions (FAQs)

  • Texas Instruments provides a recommended PCB layout and thermal management guide in their application note SLVAE03, which includes guidelines for thermal pad connection, power plane layout, and decoupling capacitors.
  • To configure the DS160PR822NJXT for high-speed operation, ensure that the input signal is properly terminated, and the output is loaded with a 50-ohm resistor. Additionally, set the device's output swing to the desired level using the VREF pin, and adjust the output termination resistors accordingly.
  • The DS160PR822NJXT is rated for operation from -40°C to 125°C, but it's essential to consider the derating of the device's performance and power consumption at higher temperatures.
  • To ensure proper startup and power sequencing, follow the recommended power-up sequence in the datasheet, which involves powering up the VCC and VCCA pins simultaneously, followed by the input signal. Additionally, use a power-on reset (POR) circuit to ensure a clean startup.
  • The recommended input termination scheme is a 50-ohm resistor in series with the input signal, while the output termination scheme depends on the specific application. For example, a 50-ohm resistor in series with the output can be used for point-to-point connections, while a 100-ohm differential termination can be used for differential signaling.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

DS160PR822NJXT Overview

Use the download button to access the DS160PR822NJXT schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like DS160, or try a keyword search, such as Line Driver or Receivers

About Texas Instruments

Texas Instruments (TI) designs and manufactures semiconductors and integrated circuits for a wide range of applications. The company's product portfolio includes analog chips, which are essential for managing power and signal functions in electronic devices, and embedded processors, which serve as the brains in various systems, enabling functionality in everything from industrial equipment to consumer electronics. TI's innovations in semiconductor technology have made it a leader in the industry.

Parts related to DS160PR822NJXT

Showing 0 results