The recommended PCB layout for the DS90C383AMTDX involves keeping the input and output traces as short as possible, using a solid ground plane, and placing decoupling capacitors close to the device. Additionally, it's recommended to use a 4-layer PCB with a dedicated power plane and a dedicated ground plane to minimize noise and crosstalk.
To ensure proper termination, the DS90C383AMTDX requires a 100-ohm differential termination resistor at the receiver end, and a 50-ohm single-ended termination resistor at the transmitter end. Additionally, the device requires a 0.1uF capacitor in parallel with the termination resistor to filter out high-frequency noise.
The maximum cable length supported by the DS90C383AMTDX depends on the type of cable used and the frequency of operation. Generally, the device can support cable lengths up to 10 meters at a data rate of 1.5 Gbps, and up to 5 meters at a data rate of 3 Gbps. However, it's recommended to consult the datasheet and perform signal integrity simulations to determine the maximum cable length for a specific application.
The DS90C383AMTDX can be configured for a specific data rate and transmission mode using the device's control pins and registers. The device supports multiple data rates, including 1.5 Gbps, 3 Gbps, and 4.5 Gbps, and can be configured for either single-ended or differential transmission modes. Consult the datasheet for specific configuration details and register settings.
The DS90C383AMTDX requires a specific power sequencing to ensure proper operation. The device's power supplies (VCC and VCCA) must be powered up simultaneously, and the clock signal must be applied after the power supplies have reached their nominal voltage. Additionally, the device's control pins must be held in a high-impedance state during power-up to prevent unwanted device configuration.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
DS90C383AMTDX Overview
Use the download button to access the DS90C383AMTDX schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like DS90C,
or try a keyword search, such as Line Driver or Receivers
About Texas Instruments
Texas Instruments (TI) designs and manufactures semiconductors and integrated circuits for a wide range of applications. The company's product portfolio includes analog chips, which are essential for managing power and signal functions in electronic devices, and embedded processors, which serve as the brains in various systems, enabling functionality in everything from industrial equipment to consumer electronics. TI's innovations in semiconductor technology have made it a leader in the industry.
