Part Image

DS90CF383MTD/NOPB - Texas Instruments

Description: LVDS Flat Panel Display 227Mbps 0.45V 56-Pin TSSOP Tube

Download DS90CF383MTD/NOPB Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
DS90CF383MTD/NOPB - Texas Instruments PCB footprint - Small Outline Packages - Small Outline Packages - DS90CF384MTDX/NOPB
click to zoom
3D Models
DS90CF383MTD/NOPB - Texas Instruments  - 3D model - Small Outline Packages - DS90CF384MTDX/NOPB
click to zoom

DS90CF383MTD/NOPB Details

  • Manufacturer Part Number:

    DS90CF383MTD/NOPB

  • Brand Name:

    Texas Instruments

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Not Recommended

  • Part Package Code:

    TSSOP

  • Pin Count:

    56

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.90

  • Date Of Intro:

    1997-06-01

  • Manufacturer:

    Texas Instruments

  • YTEOL:

    3.9

  • Differential Output:

    YES

  • Driver Number of Bits:

    5

  • Input Characteristics:

    STANDARD

  • Interface IC Type:

    LINE DRIVER

  • Interface Standard:

    EIA-644; TIA-644

  • JESD-30 Code:

    R-PDSO-G56

  • JESD-609 Code:

    e3

  • Length:

    14 mm

  • Moisture Sensitivity Level:

    2

  • Number of Functions:

    1

  • Number of Terminals:

    56

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Out Swing-Min:

    2.7 V

  • Output Characteristics:

    DIFFERENTIAL

  • Output Low Current-Max:

    0.002 A

  • Output Polarity:

    COMPLEMENTARY

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    TSSOP

  • Package Equivalence Code:

    TSSOP56,.3,20

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE, THIN PROFILE, SHRINK PITCH

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    1.2 mm

  • Supply Current-Max:

    55 mA

  • Supply Voltage-Max:

    3.6 V

  • Supply Voltage-Min:

    3 V

  • Supply Voltage-Nom:

    3.3 V

  • Supply Voltage1-Max:

    3.6 V

  • Supply Voltage1-Min:

    3 V

  • Supply Voltage1-Nom:

    3.3 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    0.5 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Width:

    6.1 mm

DS90CF383MTD/NOPB Frequently Asked Questions (FAQs)

  • Texas Instruments provides a recommended PCB layout in the datasheet, but it's also recommended to follow general high-speed design guidelines, such as using a solid ground plane, minimizing trace lengths, and using 50-ohm transmission lines.
  • To ensure signal integrity, use a controlled impedance PCB, minimize signal reflections, and use termination resistors at the receiver end. Also, ensure that the clock signal is properly terminated and that the signal traces are properly routed.
  • The maximum cable length supported by the DS90CF383MTD/NOPB depends on the specific application and the type of cable used. However, as a general guideline, the device can support cable lengths up to 10 meters at a data rate of 1 Gbps.
  • To troubleshoot issues with the DS90CF383MTD/NOPB, use a logic analyzer or oscilloscope to verify the signal integrity and timing. Check the power supply voltage, clock signal, and data signal for any anomalies. Also, ensure that the device is properly configured and that the firmware is up-to-date.
  • Yes, the DS90CF383MTD/NOPB can be used in a multi-lane configuration to increase the data transfer rate. However, this requires careful planning and design to ensure proper signal routing and termination.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

DS90CF383MTD/NOPB Overview

Use the download button to access the DS90CF383MTD/NOPB schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like DS90C, or try a keyword search, such as Line Driver or Receivers

About Texas Instruments

Texas Instruments (TI) designs and manufactures semiconductors and integrated circuits for a wide range of applications. The company's product portfolio includes analog chips, which are essential for managing power and signal functions in electronic devices, and embedded processors, which serve as the brains in various systems, enabling functionality in everything from industrial equipment to consumer electronics. TI's innovations in semiconductor technology have made it a leader in the industry.

Parts related to DS90CF383MTD/NOPB

Showing 0 results

DS90CF383MTD/NOPB Alternates

Showing results

Image Part Number Model
Part Image DS90C383AMTD Rochester Electronics LLC

5 LINE DRIVER, PDSO56, TSSOP-56

Part Image DS90C383MTD National Semiconductor Corporation

Line Driver, 4 Func, 4 Driver, CMOS, PDSO56

Part Image DS90C383BMTX/NOPB National Semiconductor Corporation

Line Driver, 1 Func, 4 Driver, CMOS, PDSO56

Part Image DS90C383MTDX/NOPB Texas Instruments

Line Driver, 4 Func, 4 Driver, CMOS, PDSO56

Part Image DS90CF383AMTDX Texas Instruments

Line Driver, 5 Func, 5 Driver, CMOS, PDSO56

For a full list of alternate parts for DS90CF383MTD/NOPB, check out Findchips.com